[Free] 2017(Oct) Dumps4cert Testinsides Cisco 400-351 Dumps with VCE and PDF Download 141-150

Dumps4Cert 2017 Oct Cisco Official New Released 400-351
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/400-351.html

CCIE Wireless (v3.1)

Question No: 141 – (Topic 2)

Which two configuration are required on the Cisco 5760 WLC to ensure that APs will successfully join the Cisco WLC? (Choose two)

  1. Enable IP DHCP SNOOPING TRUST on the wireless controller port-channel interface

  2. Activate the apocopate Right-to-use AP license on the wireless LAN controller

  3. Ensure that port-fast is enabled on each access point switch port

  4. Ensure accurate configuration of the correct time and date on the wireless LAN controller

Answer: B,D

Question No: 142 DRAG DROP – (Topic 2)

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 143 – (Topic 2)

Which two options are benefits of moving the application development workload to the cloud? (Select Two)

  1. it provides you full control over the software packages and vendor used

  2. The application availability is not affected by the loss of a single virtual machine

  3. The workload can be moved or replicated easily.

  4. It provides a more secure environment

  5. High availability and redundancy is handled by the hypervisor.

Answer: B,C

Question No: 144 DRAG DROP – (Topic 2)

Drag and drop the AVC configuration feature on the left to their respective function on the right.?

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Explanation:

http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime- infrastructure/solution_overview_c22-728972.html http://mrncciew.com/2013/02/13/who-really-support-wlc-netflow/ http://mrncciew.com/2013/10/07/3850-flexible-netflow/ http://docwiki.cisco.com/wiki/AVC:AVC_Tech_Overview https://en.wikipedia.org/wiki/NetFlow

Dumps4Cert 2017 PDF and VCE

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7- 5/AVC_dg7point5.html#pgfId-50665

Question No: 145 – (Topic 2)

Which three options are valid AP modes for lightweight APS in the WLC 7.0.116 release? (Choose three.)

  1. SE-Connect

  2. WPS

  3. RAM

  4. OEAP

  5. Rogue Detector

  6. Sniffer

Answer: A,E,F

Explanation: http://www.cisco.com/c/en/us/td/docs/wireless/controller/7- 0MR1/configuration/guide/wlc_cg70MR1.pdf

Question No: 146 – (Topic 2)

Which description is true about NIC cards certified by Cisco Compatible Extensions?

  1. They support Cisco Standards such as LEAP and EAP-FAST but not PEAP-MSCHAP

  2. They are compliant with Cisco Compatible Extensions, but not with Wi-Fi

  3. They support Cisco WLAN technology enhancements

  4. They support 802.11 standards plus power management only

Answer: C

Question No: 147 – (Topic 2)

Which two options are valid mobility roles in which a controller can operate in during a client mobility session? (Choose two.)

  1. local

  2. auto anchor

  3. export anchor

  4. mobility announcer

Answer: A,C

Question No: 148 – (Topic 2)

Which two statement describe characteristics of high availability cisco 5760wireless LAN controller that uses the stackwise-480 technology?(choose two)

  1. A switch stach has only three WLCs one active WLC and two standby WLCs

  2. lf the WLC become unavailable the standby assumes the role of the active and cont.nue to the keep the stack operational.

  3. A switch stack has only Two WlCs both WLCs are in active/active mode

  4. A switch stack has only two WLCs one active and one standby WLC.

Answer: B,D

Question No: 149 – (Topic 2)

You have added your active directory server to the cisco ISE and see the status as operational.However when you try to add active directory groups to your authorization policy conditions in the Cisco ISE ,no active Directory groups appear,what is the most likely reason?

  1. The credentials used to join the Cisco ISE to active directory do not have succulent

    privtleges to query active directory.

  2. You did not add any attribute in the Active Directory join point under the External identify source

  3. You dtd not add any groups in the Active Directory jom potnt under the External identity source D. A firewall is blocking tcp port 389 between the cisco ISE and active directory

Answer: C

Question No: 150 DRAG DROP – (Topic 2)

You are authenticating users using LWA and ISE guest portal. Drag and drop the step in the process on the left into the correct order on the right ?

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

100% Free Download!
Download Free Demo:400-351 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 400-351 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE

[Free] 2017(Oct) Dumps4cert Testinsides Cisco 400-351 Dumps with VCE and PDF Download 131-140

Dumps4Cert 2017 Oct Cisco Official New Released 400-351
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/400-351.html

CCIE Wireless (v3.1)

Question No: 131 DRAG DROP – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Drag and drop steps of the 802.1x authentication process on the left to the corresponding number on the right.

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 132 DRAG DROP – (Topic 2)

Drag and drop the 802.11 standards on the left onto the corresponding descriptions on the right.

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 133 – (Topic 2)

Which feature insersection of a Cisco 5760 Wireless LAN Controller with HA AP SSO is not true?

  1. Upon guest anchor controller switchover, mobility tunnels stay active, APs remain connected, clients rejoin at MA or MC, and clients are anchored on the new active controller.

  2. Roamed clients that have their data path going through the mobility tunnel endpoint quot; become Localquot; in case of Layer 2 with sticky anchoring an Layer3 roam. Layer 2 roamed clients are not affected except when roaming occurs between Cisco Unified Wireless Network and CA controllers.

  3. wIPS information is synced to the standby unit. The standby unit does not have to relarn wIPS information upon switchover.

  4. Switchover during AP preimage download caused the APs to start image download all over again from the new active controller.

Answer: B

Question No: 134 – (Topic 2)

You are working on a deployment that uses two Cisco APs as wireless bridges. One of the bridges is configured as a root bridge and the second bridge is configured as a nonroot bridge. Client A associates to the root bridge and client B associates to the nonroot bridge. Which two statements about this scenario are true? (Choose two)

  1. The default setting of a bridge is nonroot bridge.

  2. For two bridges to communicate with each other, one of the bridges must be in root mode and the other bridge must be in nonroot mode.

  3. Only one device can connect to the Ethernet port of a nonroot bridge.

  4. Two bridges that are in root mode can talk to each other.

  5. In point-to-multipoint bridging, WGB is not recommended with the root bridge. WGB must be associated to the root AP in point-to-multipoint bridging setup.

Answer: A,E Explanation:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/16041- bridge-faq.html

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/22950-br-ts- 22950.html#reset

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3- 3/configuration/guide/cg15-3-3/cg15-3-3-chap6-radio.html

Question No: 135 – (Topic 2)

Refer to the exhibit. At which rate are the multicast frames transmitted by an autonomous AP configured with these data rates, considering the client on the AP is a 802.11b client?

  1. 36.0 mbps

  2. 11.0 mbps

  3. 12.0 mbps

  4. 5.5 mbps

  5. 2 mbps

Answer: B

Question No: 136 – (Topic 2)

An autonomous AP is configured with the infrastructure -client command. What is this command used for?

  1. to allow more than 20 client associations

  2. to send reliable multicast traffic

  3. to enable multiple VLANs to cross the bridge link

  4. to allow only infrastructure device associations

Answer: B

Question No: 137 – (Topic 2)

Which ArieOS release is the first to support New Mobility on the 2504 WLC ?

A. 7.4.x

B. 7.6.x

C. 8.0.x

D. 8.1.x

Answer: B

Question No: 138 – (Topic 2)

Which three statements about 802.11ac are true? (choose three)

  1. MU-MIMO is supported in wave 1

  2. MU-MIMO allows one AP to transmit unique data to multiple stations simultaneously

  3. when using MU-MIMI up to 8 devices can transmit data at the same time

  4. 802.11 a/b/g/n device are able to connect to 802.11ac radios

  5. it IS possible to reach 160 MHz by combining two discontinuous 80 MHz channel block

  6. 802.11 ac is supported in the 2.4- and 5-Ghz radio band

Answer: B,D,E

Question No: 139 – (Topic 2)

Which multicast mode is recommended when configuring Media Stream on a Cisco WLC?

  1. multicast-uncast

  2. multicast-routing

  3. multicast-multicast

  4. multicast-direct

Answer: C

Question No: 140 – (Topic 2)

Which two statements are true with regards to RRM? (Choose two.)

  1. RRM neighbor messages are sent at the lowest mandatory speed.

  2. RRM neighbor messages are sent on channel 1.

  3. RRM neighbor messages are sent at minimum power.

  4. RRM neighbor messages are sent over the air.

  5. RRM neighbor messages are sent every 120 sec by default.

Answer: B,D

100% Free Download!
Download Free Demo:400-351 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 400-351 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE

[Free] 2017(Oct) Dumps4cert Testinsides Cisco 400-351 Dumps with VCE and PDF Download 121-130

Dumps4Cert 2017 Oct Cisco Official New Released 400-351
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/400-351.html

CCIE Wireless (v3.1)

Question No: 121 – (Topic 2)

You are installing CA controllers that run Cisco ISO-XE and you are ready to implement QoS. Which QoS target level apply to downstream traffic (toward the client)?

  1. Client SSID

  2. Client SSID radio

  3. Client SSID Radio port

  4. Client radio

Answer: C

Question No: 122 – (Topic 2)

Which option is a feature of a Cisco Autonomous AP that prevents over-the-air direct P2P communication, which forces all traffic to hit the first-hop router where security policy is enforced?

  1. Public Secure Packet Forwarding

  2. Cisco Wireless LAN Controller and Access Point Platforms

  3. FlexConnect AP upgrade feature

  4. Access Point Radios

Answer: A

Question No: 123 – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

The network operations center is using PI to collect and monitor the AVC data from a cisco WLC however no AVC information is showing up in cisco PI based on this information from the Cisco WLC reason that Cisco PI is not showing the information is True.?

  1. Cisco prime does not have the correct licensing installed.

  2. The monitor-Name and exporter-name do note match

  3. The Exporter-IP should be the IP address of the cisco WLC

  4. The port number should be 9991.

Answer: D

Question No: 124 – (Topic 2)

Which of the following organizations certifies WLAN product compatibility and interoperability between vendors by providing certification testing?

  1. CCX

  2. ETSI

  3. FCC

  4. IEEE

  5. Wi-Fi Alliance

Answer: E

Question No: 125 – (Topic 2)

which two statements about accessing the GUI and CLI of Cisco WLC are true?

  1. Use the config domain add -N command on the Cisco WLC.

  2. The wireless client can access the Cisco WLC only when the option quot;Enable controller wireless Management to be accessible from wireless client is checkedquot;

  3. The feature management using dynamic interface can be applied to one of the dynamic interfaces only.

  4. Add the country code for Panama (PA) through the Cisco WLC web GUI.

Answer: B,C

Question No: 126 – (Topic 2)

Which three type of ACLs are supported by the Cisco 5760 WLC?

  1. VLAN ACLS (VLAN MAPS)

  2. Switch Port ACls

  3. Router ACLs

  4. QoS ACLs

  5. Router Port ACLs

  6. Port ACLs

Answer: A,C,F

Question No: 127 – (Topic 2)

Which technology is used by AVC on a Cisco WLC for identification and classification of applications?

  1. modular QoS CLI

  2. NBAR

  3. ACL

  4. IP precedence

Answer: B

Question No: 128 – (Topic 2)

802.11k and 802.11k-enabled client devices send a request for a list of neighbor APs (a

neighbor list) from the APs they are currently associated with. What is this 802.11management frame also known as?

  1. association response

  2. association packet

  3. beacon frame

  4. action packet

Answer: D

Question No: 129 DRAG DROP – (Topic 2)

Drag and drop the characteristic on the left to the appropriate EAP type on the right.

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 130 – (Topic 2)

You have configured video stream on a Cisco WLC and users are now viewing the company video broadcast over the wireless network how can you verify you have video stream configures and working in the cisco WLC GUI?

  1. The multicast status shows quot;normalmulticastquot; in the multicast group detail

  2. The multicast status shows quot;MediaStream allowedquot; in the multicast group detail

  3. The WMM state shows quot;Enabledquot; into the clients detai

  4. The multicast status shows quot;multicast-direct allowedquot; in the multicast group detail

Answer: D

100% Free Download!
Download Free Demo:400-351 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 400-351 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE

[Free] 2017(Oct) Dumps4cert Testinsides Cisco 400-351 Dumps with VCE and PDF Download 111-120

Dumps4Cert 2017 Oct Cisco Official New Released 400-351
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/400-351.html

CCIE Wireless (v3.1)

Question No: 111 – (Topic 2)

Which MSS value is appropriate on a Cisco 5508 WLC in an IPV6-only environment?

A. 1236

B. 2131

C. 1285

D. 1331

Answer: D

Question No: 112 – (Topic 2)

Refer the exhibit.

Dumps4Cert 2017 PDF and VCE

The created dynamic interfaces are bound to an interface group for a specific WLAN profile in a Cisco Wireless LAN Controller. You have noticed duplicated multicast streams on the wireless medium for the given WLAN profile. Which statement is correct?

  1. Global multicast mode, globai 1Pv6 config, and multicast listener discovery snooping have not been enabled. Enable this to avoid duplicate streams.

  2. Global multicast mode and internet group management protocol snooping have not been enabled . To avoid stream enable both .

  3. The controller creates different multicast groups IDs for each multicast address and VLAN and a result the upstream router sends one copy for each VLAN. Enable Multicast VLAN to avoid duplicate streams.

  4. The controller always uses layer 3 multicast group 10 for all layer 3 multicast traffic sent to the access point internet group management protocol snooping should be disabled to avoid duplicate streams.

Answer: C

Question No: 113 – (Topic 2)

Refer to the exhibit. A wireless engineer at ACME Company is troubleshooting a wireless client that is unable to associate to a WLAN. What is likely the cause of the problem?

Dumps4Cert 2017 PDF and VCE

  1. The AP CAPWAP tunnel is down, and is unable to handle any new connections.

  2. The client is providing a wrong credential for dot1x authentication.

  3. The WPA PSKs do not match.

  4. The client uses WPA, but the AP is advertising only WPA2 support.

  5. A firewall is blocking the ports that are necessary for the AP to join the WLC.

Answer: B

Question No: 114 – (Topic 2)

During the Cisco 5760 WLC high availability active and standby process (elected or re- elected) which factor can determine which Cisco 5760 WLC become active?

  1. The cisco 5760 WLC the highest stack member priority value

  2. the cisco 5760 WLC the highest IP address

  3. the cisco 5760 WLC the lowest stack member priority value.

  4. the cisco 5760 WLC the highest Mac address

Answer: A

Question No: 115 DRAG DROP – (Topic 2)

When you enable QoS in a Cisco Unified Wireless environment, the AP queues packets based on the layer 2 CoS value for each packet. The AP processes and applies QoS policies in a specific order. Drag and drop the QoS statement on the left to the correct order of how the AP processes and applies QoS policies on the right.

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 116 DRAG DROP – (Topic 2)

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 117 – (Topic 2)

Which three steps are required during the intial configuration of a Cisco Converged Access controller so that the access points can join? (Choose three)

  1. The Cisco 5760 controller that acts as a mobility controller can support up to 10000APs.

  2. Ensure that an active license is enabled with the proper AP count.

  3. Ensure that the wireless management interface is correctly configured.

  4. In a Converged Access deployment, the APs must be on the same VLAN as the wireless management interface.

  5. To enable wireless services, the Cisco 3850 switch must run an ipservices or ipbase license.

  6. Network connectivity is not necessary because all the APs connect directly to the Converged Access controller.

Answer: B,C,E

Question No: 118 – (Topic 2)

Your customer needs the list of all the guest client that connected to Wi-Fi successfully but have not yet authenticated. The customer decides to create an advanced filter in Cisco Pounder monitor gt;client and user which two conditions should be included in the filter? (Choose two)

  1. PEM state =WebauthReqD

  2. On Network= Yes

  3. Status =Associated

  4. Type =Lightweight client

Answer: C,D

Question No: 119 – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Which AAA attribute is not used by the Cisco WLC running AireOS 8.0 ?

  1. Tunnel-Pnvate-Group-10

  2. Tunnel-Type

  3. Airespace-QOS-Level

  4. DACL

Answer: D

Question No: 120 – (Topic 2)

which topology is a valid and functional convergence access topology? 5760-AIR-CT5760-25-kg

3850-WS-C3850-48P-s

5508-AIR-CT55098 25-kg

2960-WS-C2960 24TC-S

3650-WS-C3650-24TS-L

3702-AIR-cap3702i-A-K9

A)

Dumps4Cert 2017 PDF and VCE

B)

Dumps4Cert 2017 PDF and VCE

C)

Dumps4Cert 2017 PDF and VCE

D)

Dumps4Cert 2017 PDF and VCE

  1. Exhibit A

  2. Exhibit B

  3. Exhibit C

  4. Exhibit D

Answer: A

100% Free Download!
Download Free Demo:400-351 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 400-351 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE

[Free] 2017(Oct) Dumps4cert Testinsides Cisco 400-351 Dumps with VCE and PDF Download 101-110

Dumps4Cert 2017 Oct Cisco Official New Released 400-351
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/400-351.html

CCIE Wireless (v3.1)

Question No: 101 – (Topic 2)

You want to set up Prime infrastructure to be notified when a device configuration has changed. Which option is available in prime infrastructure 2.2 ?

  1. Set up prime infrastructure to send an email containing the device configuration change(s} on regularly scheduled.

  2. Set up prime Infrastructure to send an email containing the change audit report immediately after the configuration change is detected

  3. Set up prime infrastructure to send an email containing the change audit report on a regular scheduled basis

  4. Set up prime infrastructure to send an email containing the configuration change(s) immediately after the configuration change is detected.

Answer: C

Question No: 102 DRAG DROP – (Topic 2)

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 103 – (Topic 2)

Given: LAG bundles all distribution ports on a WLC into a single 802.3ad port channel.The system load-balances access points transparently to the user. Question: Which two items should be taken into consideration when configuring the neighbor Ethernet switch? (Choose two.)

  1. The Cisco WLC relies on the neighbor switch to load-balance traffic across the EtherChannel. The Cisco WLC does not perform any EtherChannel load-balancing on its own.

  2. LAG requires theEtherChannel to be configured for the quot;onquot; mode on the Catalyst switch.

  3. LAG requires that the Catalyst switch be configured with CiscoPAgP. Link Aggregation Control Protocol is not supported.

  4. The load-balancing method configured on the Catalyst switch must be based on Layer 2, not Layer 3. Failure to follow this recommendation may result in problems with access point association.

Answer: A,B

Question No: 104 DRAG DROP – (Topic 2)

Drag and drop the RF performance metric on the left to the threshold that is recommended to provide good voice over wireless performance on the right.

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 105 DRAG DROP – (Topic 2)

Drag and drop the route type on the left to their intended usage on the right.

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 106 – (Topic 2)

Which two sets of ports are used to configure high availability database connection between the primary and secondary Prime infrastructure 2.2? (Choose two)

A. TCP 1522/UDP 1522

B. TCP 2705/UDP2705

C. TCP 162 I UDP 162 D. TCP 1099/UDP 1099 E. TCP 8082/UDP 8082

Answer: A,E

Question No: 107 – (Topic 2)

Which AireOS release id the first to support new Mobility on the Cisco 2504 WLC?

  1. 8.1x

  2. 7.6x

  3. 7.4x

  4. 8.0x

Answer: B

Explanation: http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration- guHYPERLINK quot;http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration- guide/b_cg76/b_cg76_chapter_010010110.htmlquot;ide/b_cg76/b_cg76_chapter_010010110.h tml

Question No: 108 – (Topic 2)

Which statement about Wired Guest Access is true?

  1. The wired guest traffic terminates only on the anchor Cisco WLC

  2. Wired Guest Access is not supported in the Cisco 5760 WLC.

  3. The Cisco 5760 WLC supports Wired Guest Access only in conjunction with the converged access switches.

  4. The guest traffic can terminate on the foreigh WLC, but egress interface must be defined on the guest SSID.

Answer: A

Question No: 109 DRAG DROP – (Topic 2)

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 110 – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

which is a configure snippet of a cisco 5760 controller running code IOS XE 3.6.3 which statement about wlan 11 is true ?

  1. This configuration is for custom WebAuth with an external RADIUS server

  2. This configuration is for custom WebAuth with local authenticationC. This configuration is for WebAuth with an external RADIUS server

  3. This configuration is for WebAuth with local authentication

  4. This configuration is for external WebAuth with an external RADIUS server

Answer: C

100% Free Download!
Download Free Demo:400-351 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 400-351 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE

[Free] 2017(Oct) Dumps4cert Testinsides Cisco 400-351 Dumps with VCE and PDF Download 91-100

Dumps4Cert 2017 Oct Cisco Official New Released 400-351
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/400-351.html

CCIE Wireless (v3.1)

Question No: 91 – (Topic 2)

Harry is a network engineer for a company, he is now upgrading a large autonomous WLAN deployment to LWAPP operation. He has successfully imported a X.509 self-signed certificate into the WLC. But, when he tries to add additional self-signed certificates, the WLC GUI reports a quot;Failed to Add entryquot; error.

Which command can diagnose the root cause of this problem?

  1. Show wps summary

  2. Show database summary

  3. Show exlusionlist

  4. Show sysinfo

Answer: B

Question No: 92 – (Topic 2)

Which description is correct with regard to the operation of an access point in Rogue Location discovery Protocol Mode?

  1. The AP uses the existing wireless infrastructure in order to scan for rogue AP#39;s. Once discovered, these rogues are added to a local list that includes the rogue#39;s BSSIDs, MAC addresses and any discovered security provisions (WPA, WEP etc)

  2. The AP moves to the rogue channel and attempts to connect to the rogue as a client. The AP then tries to obtain an IP address and forwards a UDP packet to the controller through the rogue. If the controller receives this packet, the network administrator is notified that a rogue AP has been discovered on the wired network

  3. The AP detects a rogue client and then the network administrator is able to contain both the rogue AP and the rogue clients. This can be achieved because 802.11 deauthentication packets are sent to clients that are associated to rogue APs so threats such as holes are mitigated

  4. The AP determines whether or not a rogue access point is on a trusted network. It does not provide RF service of any kind but rather receives periodic rogue access point reports from the controller and sniffs all ARP packets. If it finds a match between an ARP request and a MAC address it receives from the controller. It generates a rogue access point alert

to the controller

Answer: B

Question No: 93 – (Topic 2)

legacy 802.11b wireless scanners are begin implemented in your autonomous AP deployment Existing modern clients work fine on the same SSIDs, APs, and channel the legacy scanner are having difficulty maintaining reliable wireless connectivity which AP configured could potential correct this issue

  1. Enable short preamble Dot11Radio0

  2. Disable short preamble Dot11radio1

  3. Disable short preamble dot 11 radio0

  4. Confirm that 802.11n support is disable

  5. Conf1gure globalpreamble negotiation

  6. Enable short preamble on Dot 11Radio1

Answer: C

Question No: 94 – (Topic 2)

There are 5 switches in the network use VTPv3, SW1 and SW2 configured as Server mode. SW1 is the primary server with revision 50. When add a new SW6 with Revision 200, what will happen?

  1. Switch3 updates its own database with the VLAN information received from SW2

  2. VTPv3 configure own database with the VLAN information received from SW1

  3. Switch6 updates its own database with the VLAN information received from SW1

  4. No switch will work

Answer: C

Question No: 95 – (Topic 2)

When creating a guest account on Cisco identity Services Engine .Which option in the sponsor portal allows for the guest credentials to be used for RADIUS authentication without requiring the guest user to log into the guest portal?

  1. Set the Guest role to Guest

  2. Set the Guest role to Activated guest

  3. Set the Time Profile to Radius 1Day

  4. Check the box to send email not send email notification id the guest user name is based on the email address.

Answer: B

Question No: 96 – (Topic 2)

During the startup Wizard process on the Cisco 57760 WLC which two configuration are required within the configuration dialogue to ensure basic network connectivity of the controller to the management network? (choose two)

  1. configuration of the controller Hostname

  2. configuration of the enable secret password

  3. configuration of the network time protocol server

  4. configuration of the GigabitEthernet 0/0 interface

  5. configuration of the wireless management interface

Answer: B,E

Question No: 97 – (Topic 2)

Flexconnect APs have already deployed in a branch office for local switching.Currently the WLAN in the large auditorium is proposed to change to high-density design and thus some low data rates are proposed to be disabled while keeping the data rates in other areas under the same Cisco WLC.Which configuration settings must be modified in the Cisco WLC to achieve this configuration ?(choose two)

  1. FlexconnectgroupS

  2. Mobility groups

  3. AP Groups

  4. RF profiles

Answer: C,D

Question No: 98 – (Topic 2)

How to monitor CPU utilization on a wireless LAN Controller?

  1. Define the network management system and community in the WLC and a matching v1 or v2 community-string in the network management system to enable the WLC CPU OID to be polled

  2. Define the network management system as a trap receiver and enable the default RFC 1213 traps, which include SysCPUUtilization

  3. Define the network management system in the WLC with a matching read-write SNMP community to enable the WLC CPU OID to be polled with an SNMP set by the network management system

  4. Define an external syslog receiver in the WLC that will receive a syslog message when the percentage of CPU processing ability reaches a preconfigured percentage

Answer: A

Question No: 99 – (Topic 2)

What are the three components that are used within the authentication process on an 802.1x/EAP- enabled WLAN? (Choose three.)

  1. wireless web server

  2. supplicant

  3. authenticator

  4. Cisco WCS

  5. authentication server

  6. key management server

Answer: D,E,F

Question No: 100 – (Topic 2)

What are the three fundamental properties that are provided by the antenna of an AP? (Choose three.)

  1. frequency

  2. gain

  3. dB loss

  4. polarization

  5. direction

  6. modulation

Answer: B,D,F

100% Free Download!
Download Free Demo:400-351 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 400-351 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE

[Free] 2017(Oct) Dumps4cert Testinsides Cisco 400-351 Dumps with VCE and PDF Download 81-90

Dumps4Cert 2017 Oct Cisco Official New Released 400-351
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/400-351.html

CCIE Wireless (v3.1)

Question No: 81 – (Topic 1)

Which three types of ACLs are supported by the Cisco 5760 WLC? (Choose three.)

  1. Port ACLs.

  2. VLAN ACLs(VLAN maps).

  3. Router port ACLs.

  4. AP Radio ACL Switch port ACLs.

  5. Router ACLs.

Answer: A,B,E Explanation:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/security

/configuration_guide/b_sec_3se_5700_cg/b_sec_1501_3850_cg_chapter_01010.html#ID6 3

ACL Precedence Port ACLs Router ACLs VLAN Maps

Question No: 82 – (Topic 1)

Which two advanced WLAN options are required when deploying central web authentication with Cisco ISE? (Choose two.)

  1. P2P Blocking Action set to Drop.

  2. NAC State RADIUS NAC

  3. NAC State SNMPNAC.

  4. DHCP Addr. Assignment disabled.

  5. Allow AAA override enabled.

Answer: B,E Explanation:

From

Dumps4Cert 2017 PDF and VCE

http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732- central-web-auth-00.html

Question No: 83 – (Topic 1)

Refer to the exhibit. It belongs to a Cisco IOS AP with just one radio. This portion of configuration refers to a multiple SSID/VLAN configuration. Which statement is correct?

Dumps4Cert 2017 PDF and VCE

Refer to the exhibit. It belongs to a Cisco IOS AP with just one radio. This portion of configuration refers to a multiple SSID/WLAN configuration. Which statement is correct?

  1. The configuration does not allow for non-corporate clients to connect to any SSID Guest traffic.There fore will not allowed.

  2. #39;mbssid guest-mode#39; is used to allow broad cat of multiple SSIDs on the radio interface. No other #39;mbssidquot; commands are needed to achieve this functionality.

  3. The AP must have subinterfaces 80,81,and 82 configured on the Radio 0 and Ethernet interfaces.

  4. The SSID quot;EAPquot; will allow clients to connect to it using any EAP authentication method such as EAP-TLS.

Answer: C Explanation:

Dumps4Cert 2017 PDF and VCE

Consider the association process of a wireless client to an SSID. Drag and drop the client actions from the left into the correct order of operation on the right.

Left:

802.11 probe request 802.11 association request EAPol key message 2 802.11 authentication request EAP identity response

Right:

Step1 ——-Step1 802.11 probe request

Step2 ——-Step2 802.11 authentication request Step3 ——-Step3 802.11 association request Step4 ——-Step4 EAP identity response

Step5 ——-Step5 EAPol key message 2

Question No: 84 – (Topic 1)

Which of the below characteristics of RPL is true?

  1. RPL is designed 1)or lossy networks.

  2. RPL is an IPv6 link-state routing protocol.

  3. RPL can send only messages in secured mode.

  4. RPL uses hello messages to send routing updates to its neighbors.

Answer: A Explanation: From:

http://www.openmote.com/standards/ietf-rpl.html http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/rpl/configuration/15-mt/rpl-15-mt- book.html

https://datatracker.ietf.org/doc/rfc6550/?include_text=1

Question No: 85 – (Topic 1)

When your wireless client device roams from one AP to another on the same network, which IEEE protocol can be used to authenticate the clients faster?

  1. 802.11r also called Assisted Roaming

  2. 802.11k also called Assisted Roaming

  3. 802.11r also called Fast BSS Transition

  4. 802.11k also called Predictive Based Roaming

  5. 802.llr also called Predictive Based Roaming

  6. 802.11k also called Fast BSS Transition

Answer: C

Question No: 86 – (Topic 1)

On a Cisco autonomous AP, the maximum number of attempts to send a packet (packet retries) is set to 32 by default. Which statement about the result when the AP has tried to send a packet for that number of attempts and no response is received from the client is true?

  1. The access point drops the packet.

  2. The client MAC address is excluded for 60 seconds.

  3. The access point resets the radio interface.

  4. The access point disassociates the client.

    Answer: A

    Explanation:

    From:

    Packet Retries amp; Max-Retries I mrn-cciew https://mrncciew.com/2013/06/16/packet-retries-max-retries/

    In Autonomous(IOS) AP, you can configure number of attempts the wireless device makes to send a packet before giving up amp; dropping the packet. There are two ways of configuring this feature. One method for best effort (priority value 0) traffic amp; another method for non- best effort (priority value 1-7)

    1. Best-effort Traffic (packet retries command)

    2. N on-Best-effort Traffic (packet max-retries command ) CLI default:

      packet retries 32 drop-packet channel width 40-above channel dfs station-role

      root rts retries 32 cfg:

      http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3- 3/configuration/guide/cg15-3-3/cg15-3-3-chap6-radio.html

      Configuring the Maximum Data Packet Retries

      The maximum data retries setting determines the number of attempts the makes to send a packet before giving up and dropping the packet. The default setting is 32. Beginning in privileged EXEC mode

      Question No: 87 – (Topic 1)

      Which two statements are true about adding Identity Services Engines 1.3 to Prime Infrastructure 2.2?(Choose two.)

      1. You need to use super user credentials on ISE for PI integration to work.

      2. If you add two ISEs, one should be primary and the other should be standby.

      3. Configuration templates within PI can be used to set up ISE.

      4. A maximum of three ISEs can be added to PI.

Answer: A,B Explanation:

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2- 2/user/guide/pi_ug.pdf

Question No: 88 – (Topic 1)

You are setting up a Cisco access point in repeater mode with a non-Cisco access point as the parent and you use this interface configuration on your Cisco access point.

Dumps4Cert 2017 PDF and VCE

You are getting the following error message. Which reason for this issue is true?

  1. Tll-4-CANT_A$S0C:lnterface DotllRadioO, cannot associate:No Aironet Extension IE.

  2. quot;dotll extension aironetquot; is missing under the interface DotllRadio 0 interface When repeater mode is used, unicast-flooding must be enabled to allow Aironet IE communications.

  3. The parent AP MAC address has not been defined.

  4. Repeater mode only works between Cisco access points.

Answer: A Explanation: From:

Dumps4Cert 2017 PDF and VCE

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12- 2_11_JA/configuration/guide/b12211sc/s11rep.html

Question No: 89 – (Topic 1)

You have received a new Cisco 5760 Controller and have gone through the initial startup wizard. You are now trying to add APs to the controller, but these are not joining.

Which three checks should you do next? (Choose three.)

  1. Check that the radios are not in a shutdown state.

  2. Check the country code of the controller. The APs do not join the controller if the country code does not match.

  3. Check that the correct time is set on the controller.

  4. Check that option 53 has been set in the DHCP scope.

  5. Check that the controller has enough AP licenses.

  6. Check that the controller has been configured with the correct hostname. Otherwise, DNS resolution fails.

Answer: B,C,E

Question No: 90 – (Topic 1)

Which two effects does TSPEC-based admission control have as it relates to WMM clients? (Choose two)

  1. Deny clients access to the WLAN that do not support WMM.

  2. Allow access only for VoWLAN traffic when interference is detected.

  3. Enforce airtime entitlement for wireless voice applications.

  4. Ensure that call quality does not degrade for existing VoWLAN calls.

  5. Deny clients access to the WLAN if then do not comply with the TERP standard.

Answer: C,D Explanation:

http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/vowlan/41dg/vowlan41d g-book/vowlan_ch2.html http://www.cisco.com/c/en/us/td/docs/wireless/technology/vowlan/troubleshooting/vowlan_t roubleshoot/5_Troubleshooting_CAC_Rev1-2.html#wp1053384

Topic 2, Exam Set 2

100% Free Download!
Download Free Demo:400-351 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 400-351 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE

[Free] 2017(Oct) Dumps4cert Testinsides Cisco 400-351 Dumps with VCE and PDF Download 71-80

Dumps4Cert 2017 Oct Cisco Official New Released 400-351
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/400-351.html

CCIE Wireless (v3.1)

Question No: 71 – (Topic 1)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Which option describes what this sequence of commands achievers on a Cisco Autonomus AP?

  1. This example shows how to permit SNMP access to all objects with read-only permission to only those three specific IP addresses using the community string public. The access point also sends config traps to the hosts 192.180.1.111 and 192.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community string public is not sent with the traps because is the default community value.

  2. This example shows how to permit SNMP access to all objects with read-only permission to only those three specific IP addresses using the community string public. The access point also sends config traps to the hosts 192.180.1.111 and 192.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community string public is not sent with the traps.

  3. This example shows how to permit any SNMP manager to access all objects with read- only permission using the community string public. The access point also sends config traps to the hosts 192.180.1.111 and 190.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community string public is not sent with the traps as this is the default community value.

  4. This example shows how to permit any SNMP manager to access to all objects with read-only permission using the community string public. The access point also sends

config traps to the hosts 192.180.1.111 and 190.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community string public is sent with the traps.

Answer: D Explanation:

Dumps4Cert 2017 PDF and VCE

http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol- snmp/7282-12.html

Confirmed: test in my demo switch, public default is ro

Dumps4Cert 2017 PDF and VCE

Question No: 72 – (Topic 1)

You have configured VideoStream on a Cisco WLC and users are now viewing the company video broadcast over the wireless network. How can you verify you have VideoStream configured and working in the Cisco WLC GUI?

  1. The Multicast Status shows quot;Normal Multicastquot; in the Multicast Group Details.

  2. The Multicast Status shows quot;MediaStream Ongoingquot; in the Client detail page.

  3. The Multicast Status shows quot;Multicast-direct Allowedquot; in the Multicast Group Details.

  4. The Multicast Status shows quot;MediaStream Allowedquot; in the Multicast Group Details.

Answer: C

Question No: 73 – (Topic 1)

Which two configurations are required on the Cisco 5760 WLC to ensure that APs will successfully join the Cisco WLC? (Choose two)

  1. Ensure accurate configuration of the correct time and date on the wireless LAN controller.

  2. Enable ip dhcp snooping trust on the wireless controller port-channel interface.

  3. Ensure that Port-Fast is enabled on each access point switch port.

  4. Activate the appropriate Right-to-Use AP license on the wireless LAN controller.

Answer: A,D

Question No: 74 – (Topic 1)

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Refer to the exhibit. Which three statements about this extract of the configuration of an autonomous AP are true? (Choose three)

  1. This configuration is of a non-root bridge access point.

  2. The RADIUS server IP address I misconfigured. It points to the AP itself. Which creates a loop for the RADIUS packets.

  3. This configuration allows bridging of VLANs 3 and 4.

  4. The SSID is not visible for clients proting the wireless medium.

  5. The administrator cannot access the AP via the web GUI using a secure connection.

  6. The native VLAN must be VLAN 1 to match the native VLAN configured on the switch to which the AP is connecting.

Answer: C,D,E Explanation:

Root bridge basic Config of Autonomous AP AP SSID boardcast -(=mbssid guest- mode)

https://supportforums.cisco.com/document/61936/autonomous-ap-and-bridge-basic- configuration-template#Configurationon_Non_Root_bridge

Local Radius

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116580- configure-eapfast-00.html

Question No: 75 – (Topic 1)

Which option is a feature of a Cisco Autonormous AP that prevents over-the-air direct P2P communication, which forces all traffic to hit the first-hop router where security policy is enforced?

  1. Wi-Fi Direct Client Policy

  2. P2P Secure Packet Public

  3. Secure Packet Forwarding

  4. P2P Blocking Action

Answer: C Explanation:

http://docwiki.cisco.com/wiki/Wireless_Technologies Cisco Aironet Access Points

http://www.cisco.com/web/techdoc/wireless/access_points/online_help/eag/123- 02.JA/1400BR/h_ap_network-if_802-11_c.html

Public Secure Packet Forwarding

Public Secure Packet Forwarding (PSPF) prevents client devices associated to an access point from inadvertently sharing files or communicating with other client devices associated

to the access point. It provides Internet access to client devices without providing other capabilities of a LAN.

No exchange of unicast, broadcast, or multicast traffic occurs between protected ports. Choose Enable so that the protected port can be used for secure mode configuration. PSPF must be set per VLAN.

Note: To prevent communication between clients associated to different access points on your wireless LAN, you must set up protected ports on the switch to which your access points are connected.

Wi-Fi Direct Client Policy | Security and Network Management J Cisco Support Community https://supportforums.cisco.com/discussion/11851216/wi-fi-direct-client-policy

Information About the Wi-Fi Direct Client Policy

Devices that are Wi-Fi Direct capable can connect directly to each other quickly and conveniently to do tasks such as printing, synchronization, and sharing of data. Wi-Fi Direct devices may associate with multiple peer-to-peer (P2P) devices and with infrastructure wireless LANs (WLANs) concurrently. You can use the controller to configure the Wi-Fi Direct Client Policy, on a per WLAN basis, where you can allow or disallow association of Wi-Fi devices with infrastructure WLANs, or disable Wi-Fi Direct Client Policy altogether

for WLANs. http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-

4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_ chapter_01000011.html

Question No: 76 – (Topic 1)

Two wireless IP phones are never able to call each other when connected to the same autonomous AP. However, they can place calls to other wireless IP phones that are connected to other APs or to wired IP phones. The wireless phones are operating on VLAN

100. Based on this output, which statement about the problem is true?

Dumps4Cert 2017 PDF and VCE

  1. P2P blocking is enabled via the bridge-group 100 block-unknow-source command.

  2. P2P blocking is enabled via the no bridge-group 100 unicast-flooding. command.

  3. P2P blocking is enabled via the bridge-group 100 port-protected. command.

  4. P2P blocking is enabled via the no bridge-group 100 source-learning command.

  5. P2P blocking is enabled via the bridge-group 100 subscriber-loop-control command.

Answer: C Explanation:

http://wirelessciscoccie.blogspot.hk/2013/03/in-ccie-wireless-written-exam-blue.html

Dumps4Cert 2017 PDF and VCE

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12- 3_8_JA/configuration/guide/1238jasc/s38rf.html

Question No: 77 – (Topic 1)

Which two options are new features that are supported by IGMPv3compared to IGMPv2.(Choose two)

  1. It extends IGMP. which allows for an explicit maximum response time field.

  2. It adds support for source filtering.

  3. Router can now send a group-specific query.

  4. It adds support for IGMP Leave Message.

  5. It supports the link local address 224.0.0.22. which is the destination IP address for membership reports.

Answer: B,E Explanation:

Do not understanding difference between IGMPv2 and v3 | LAN, Switching and Routing | Cisco Support Community

https://supportforums.cisco.com/discussion/10948466/do-not-understanding-difference- between-igmpv2-and-v3

IGMP Version 3 Cisco http://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/12s_igmp.html

Feature Overview

Internet Group Management Protocol (IGMP) is a protocol used by IPv4 systems to report IP multicast memberships to neighboring multicast routers.

This feature module introduces support for Version 3 of IGMP. In previous versions of Cisco IOS software only Version 1 and Version 2 were supported. IGMP Version 3 (IGMPv3) adds support for quot;source filtering,quot; which enables a multicast receiver host to signal to a router which groups it wants to receive multicast traffic from, and from which source(s) this traffic is expected. This membership information enables Cisco IOS software to forward traffic only from those sources from which receivers requested the traffic.

IGMPv3 supports applications that explicitly signal sources from which they want to receive traffic. With IGMPv3, receivers signal membership to a multicast host group in the following two modes:

INCLUDE mode-In this mode, the receiver announces membership to a host group and provides a list of IP addresses (the INCLUDE list) from which it wants to receive traffic.

EXCLUDE mode-In this mode, the receiver announces membership to a host group and provides a list of IP addresses (the EXCLUDE list) from which it does not want to receive traffic. This indicates that the host wants to receive traffic only from other sources whose IP addresses are not listed in the EXCLUDE list. To receive traffic from all sources, like in the case of the Internet Standard Multicast (ISM) service model, a host expresses EXCLUDE mode membership with an empty EXCLUDE list.

IGMPv3 is the industry-designated standard protocol for hosts to signal channel subscriptions in Source Specific Multicast (SSM). SSM was introduced in Cisco IOS Release 12.1(3)1, however SSM support for IGMPv3 was introduced in 12.1(5)T. For SSM to rely on IGMPv3; IGMPv3 must be available in last hop routers and host operating system network stacks, and be used by the applications running on those hosts.

In SSM deployment cases where IGMPv3 cannot be used because it is not supported by the receiver host or the receiver applications, there are two Cisco-developed transition

solutions that enable the immediate deployment of SSM services: URL Rendezvous Directory (URD) and IGMP Version 3 lite (IGMP v3lite). Both of these features are documented in the Cisco IOS Release 12.0(15)S Source Specific Multicast with IGMPv3, IGMP vSlite, and URD feature module.

IGMP

Version Description

IGMPvl

Provides the basic query-response mechanism that allows the multicast

router to determine which multicast groups are active and other processes that enable hosts to join and leave a multicast group. RFC 1112 defines the IGMPvl host extensions for IP multicasting.

IGMPv2

Extends IGMP. allowing such capabilities as the IGMP leave process, group-specific queries, and an explicit maximum response time field. IGMPv2 also adds the capability for routers to elect the IGMP querier without dependence on the multicast protocol to perform this task. RFC 2236 defines IGMPv2.

IGMPv3

Provides for source filtering. which enables a multicast receiver host to

signal to a router which groups it wants to receive multicast traffic from, and from which sources this traffic is expected. In addition, IGMPv3 supports the link local address 224.0.0.22. which is the destination IP address for IGMPv3 membership reports; all IGMPv3-capable multicast routers must listen to this address. RFC 3376 defines IGMPv3.

Question No: 78 – (Topic 1)

Which statement about the high availability feature on Cisco Prime Infrastructure version

2.2 is correct?

  1. With Manual Failover configured. e-mail notification is sent when the primary server goes down.

  2. Server high availability role, that is , primary or secondary can be configured post installation form Cisco Prime Infrastructure GUI interface.

  3. Port number 8088 is used to connect to the web interface of the secondary Cisco Prime Infrastructure Server.

  4. Cisco Prime Infrastructure supports multiple high availability configurations, that is, one primary and two or more secondary systems.

Answer: A Explanation:

Dumps4Cert 2017 PDF and VCE

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2- 2/administrator/guide/PIAdminBook/config_HA.html

Question No: 79 – (Topic 1)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Which statement about the rogue access point screenshot is true?

A.

AP-2 sends de-authentication packets on air using BSSID 74:a2:e6:71:51:c3 as part of containment process.

  1. This rogue AP is working on channel 1 and is manually contained using all detecting access points.

  2. SSID on this rogue AP is WMM enabled and this rogue AP is contained by single closest detecting access point at a given time.

  3. This rogue AP is contained by AP-1 and AP-2 in round-robin fashion during off-channel scan period.

Answer: C Explanation:

Dumps4Cert 2017 PDF and VCE

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan- controllers/110263-rogue-based-rogue-classification.html

Question No: 80 – (Topic 1)

Heartbeats are used to maintain the high-availability status of an application. Which factor is most important?

  1. Bandwidth

  2. Latency

  3. Routing

  4. Round-trip time

Answer: D Explanation:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7- 4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_ chapter_01111101.html https://books.google.com.hk/books?id=YLHvHGGx5AECamp;pg=PT66amp;lpg=PT66amp;dq=wlc he atbeat round trip timeamp;source=blamp;ots=ClFsWOm0RHamp;sig=5NO_zaiDBOmHlDzXfLiLgrkg pP0amp;hl=zh- TWamp;sa=Xamp;ved=0ahUKEwjb0M31vdLPAhUT9mMKHRJkDv4Q6AEIWDAH#v=onepageamp;q= wlc heatbeat round trip timeamp;f=false

Cisco Prime Infrastructure 3.1.3 Administrator Guide – Configuring High Availability [Cisco Prime Infrastructure] – Cisco http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1- 3/administrator/guide/PIAdminBook/config_HA.html

Health Monitor (HM) detects failure conditions using the heartbeat messages that the two servers exchange. If the primary server is not responsive to three consecutive heartbeat messages from the secondary, it is considered to have failed. During the health check. HM also checks the application process status and database health; if there is no proper response to these checks, these are also treated as having failed.

The HA system takes approximately 10 to 15 seconds to detect a process failure on the primary server and initiate a failover. If the secondary server is unable to reach the primary server due to a network issue, it might take more time to initiate a failover. In addition, it may take additional time for the application processes on the secondary server to be fully operational.

High Availability FAQ -Cisco. http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1130-ag-series/qa_c67- 714540.html

Q. What are the recommendations for the network between the primary and secondary controllers connected via RP over Layer 2 VLAN/fiber to achieve client SSO? A. The Layer 2 network for RP connectivity needs to follow these recommendations to ensure

appropriate performance in case of a switchover:

  • Round-trip time (RTT) latency on the redundancy link: 80 ms or less for the default keep- alive timeout or 80 percent of the configured keep-alive timeout

  • Preferred maximum transmission unit (MTU) on the redundancy link: 1500 or above

  • Bandwidth on the redundancy link: 60 Mbps or more

  • 100% Free Download!
    Download Free Demo:400-351 Demo PDF
    100% Pass Guaranteed!
    Download 2017 Dumps4Cert 400-351 Full Exam PDF and VCE

    Dumps4Cert ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

    2017 Dumps4Cert IT Certification PDF and VCE

    [Free] 2017(Oct) Dumps4cert Testinsides Cisco 400-351 Dumps with VCE and PDF Download 61-70

    Dumps4Cert 2017 Oct Cisco Official New Released 400-351
    100% Free Download! 100% Pass Guaranteed!
    http://www.Dumps4Cert.com/400-351.html

    CCIE Wireless (v3.1)

    Question No: 61 – (Topic 1)

    Which event happens when a wireless client connects to a Cisco 5760 Converged Access Controller with a WLAN configured for AAA override enabled and an invalid VLAN (not configured on the Cisco 5760) is returned as part of RADIUS accept message by the Cisco ISE server?

    1. The client is marked as associated and DHCP required state.

    2. The client is marked as authenticated but does not get an IP address.

    3. The client is put in exclusion list by the WLC.

    4. The client is put in the RUN state and is mapped to the wireless management VLAN.

    Answer: B Explanation:

    Dumps4Cert 2017 PDF and VCE

    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html# wp1043599

    Question No: 62 – (Topic 1)

    Which statement about the integration of ISE with Cisco Prime Infrastructure version 2.2 is true?

    1. Cisco Prime Infrastructure can display ISE profiling attributes for authenticated and un authenticated clients.

    2. Cisco Prime Infrastructure can collect client authentication details from up to three configured ISE servers.

    3. ISE can be added to Cisco Prime Infrastructure only using user credentials of admin user configured locally on ISE

    4. When two instances of ISE are added to Cisco Prime Infrastructure. One must be working in secondary mode.

    Answer: D Explanation:

    Dumps4Cert 2017 PDF and VCE

    Dumps4Cert 2017 PDF and VCE

    Dumps4Cert 2017 PDF and VCE

    Dumps4Cert 2017 PDF and VCE

    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2- 2/user/guide/pi_ug.pdf

    Question No: 63 – (Topic 1)

    Dumps4Cert 2017 PDF and VCE

    Refer to the exhibit. A network administrator is installing a new converged access Cisco WLC. The uplink connection is to be a Gigabit port channel. Which characteristic is true?

    1. The port channel mode is set to active and sends PDUs at 30 sec intervals.

    2. The port channel mode is set to active and sends PDUs at 1 sec intervals.

    3. The port channel uses a Cisco proprietary protocol.

    4. The port-channel member interfaces must be set to trunk mode.

    5. The port channel is currently down.

    Answer: A Explanation:

    Dumps4Cert 2017 PDF and VCE

    Age Over 1 sec and flag as SA , Slow rate and in Active mode

    Dumps4Cert 2017 PDF and VCE

    Dumps4Cert 2017 PDF and VCE

    http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/command/ce-xe-3se-3850-cr- book/ce-xe-3se-3850-cr-book_chapter_00.html

    Question No: 64 – (Topic 1)

    In which direction does Application Visibility and Control mark the DSCP value of the original packet in the wireless LAN controller?

    1. In both directions, upstream and downstream.

    2. In one direction, downstream only.

    3. In one configured direction, either upstream or downstream.

    4. In one direction, upstream only.

    Answer: A Explanation:

    http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-

    guide/b_cg80/b_cg80_chapter_011001.htmlQUESTION NO:

    Question No: 65 – (Topic 1)

    Which two statements about VXLAN are true?(Choose two.)

    1. VXLAN overcomes the 802.1Q virtual LAN address space limitation.

    2. VXLAN is an encapsulation method used to create a Layer 3 overlay network

    3. VXLAN uses the Spanning Tree Protocol for loop prevention.

    4. VXLAN is a Cisco proprietary standard.

    5. VXLAN can be used to enforce Layer 2 isolation in a multitenant infrastructure.

    Answer: A,E Explanation:

    http://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series- switches/white-paper-c11-729383.html

    Question No: 66 – (Topic 1)

    FlexConnect APs have already been deployed in a branch office for local switching. Currently the WLAN in the large auditorium is proposed to change to a high-density design and thus some low data rates are proposed to be disabled while keeping the data rates in other areas under the same Cisco WLC. Which two configuration settings must be modified in the Cisco WLC to achieve this configuration? (Choose two.)

    1. RF Profiles

    2. Mobility Groups

    3. FlexConnect Groups

    4. AP Groups

    5. Fape profile.

    Answer: A,D

    Explanation:

    From: http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-

    4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_ chapter_010001111.html

    Question No: 67 – (Topic 1)

    Which statement about 802.11h is true?

    1. DFS feature works irrespective of whether the channel setting on WLC is set to auto or manual.

    2. 802.llh is not a mandatory standard under FCC regulations.

    3. The FCC does not require 802.llh to be supported in the 5 GHz band.

    4. When the radio detects a radar, it can use the channel for only 20 minutes at a time.

    Answer: A Explanation: From:

    EEE

    802 .llh-2003-Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/IEEE_802.11h-2003

    The standard provides Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC) to the 802.11a PHY. It has been integrated into the full IEEE 802.11-2007 standard. FCC Regulations Update -Cisco http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1300- series/prod_white_paper0900aecd801c4a88.html

    https://supportforums.cisco.com/document/52376/tpc-and-dfs-overview

    Question No: 68 – (Topic 1)

    Which AireOS release is the first to support New Mobility on the Cisco 2504 WLC?

    1. 8.0x

    2. 8.1x

    3. 7.6x

    D. 7.4

    Answer: A Explanation:

    http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless- controllers/113034-2500-deploy-guide-00.html

    Question No: 69 – (Topic 1)

    In a converged access deployment, which two statements about mobility agents are true? (Choose two.)

    1. It maintains a client database of locally served clients.

    2. It manages mobility-related configuration.

    3. It handles RF functions.

    4. It is the first level in the converged access hierarchy.

    5. It is a mandatory element in the converged access design.

    Answer: A,D Explanation: From:

    CT5760 Controller Deployment Guide – Mobility Architecture [Cisco 5700 Series Wireless LAN Controllers] – Cisco http://www.cisco.com/c/en/us/td/docs/wireless/technology/5760_deploy/CT5760_Controller

    _Deployment_Guide/Mobility_Architecture.html

    Mobility Agent

    A mobility agent manages AP connectivity, CAPWAP tunnel terminations from APs and builds a database of client stations (endpoints) that are served locally as well as roamed from an Anchor WLC. Mobility agent can be either a Catalyst 3850 or a CT5760 mobility controller with an internal mobility agent running on it.

    Mobility Controller:

    A mobility controller provides mobility management tasks including inter-SPG roaming, RRM, and guest access. Mobility roaming, where a wireless client moves from one physical location to another without losing connectivity and services at any time, can be managed by a single mobility controller if roaming is limited to a mobility sub-domain. Roaming beyond a mobility sub-domain can be managed by multiple mobility controllers in a mobility group. The mobility controller is responsible for caching the Pairwise Master Key (PMK) of all clients on all the mobility controllers, enabling fast roaming of the clients within its sub- domain and mobility group. All the mobility agents in the sub-domain form CAPVVAP mobility tunnels to the mobility controller and report local and roamed client states to the mobility controller. The mobility controller builds a database of client stations across all the mobility agents.

    Mobility Oracle

    Mobility oracle further enhances mobility scalability and performance by coordinating roaming activities among multiple mobility groups, which removes the need for N2 communications between mobility controllers in different mobility groups to improve efficiency and performance.

    Mobility Sub-domain

    Multiple SPGs can be grouped together and collectively managed as a mobility sub- domain. One mobility controller is required for each mobility sub-domain.

    Switch Peer Group

    The Converged Access deployment defines an SPG as a logical group of mobility agents within one mobility controller (or mobility sub-domain). The main advantage of configuring SPGs is to constrain the roaming traffic to switches that form the SPG. When the mobility agents are configured in one SPG on the mobility controller, the software automatically forms full mesh CAPWAP tunnels between the mobility agent switches.

    These CAPWAP tunnels can be formed in a multi-layer network design (where the mobility agent switches are L2 adjacent on a VLAN spanned across) or a routed access design (where the mobility agent switches are L3 adjacent).

    The SPGs should be designed as a group of mobility agent switches to where the users frequently roam.

    Dumps4Cert 2017 PDF and VCE

    Question No: 70 – (Topic 1)

    When a Flex Connect AP is in the quot;local authentication, local switchingquot; state, it handles client authentication and switches client data packets locally. This state is valid in standalone mode and connected mode. Which three statements about a FlexConnect AP are true? (Choose three).

    1. In connected mode, the AP provides minimal information about the locally authenticated client to the controller. This information is not available on the controller policy type. Access VLAN. VLAN name, supported rates. Encryption ciphter.

    2. In connected mode, the access point provides minimal information about the locally authenticated client to the controller. However, this information is available to the controller policy type., access VLAN, VLAN name, supported rates, encryption cipher.

    3. Local authentication is useful where you cannot maintain a remote office setup of a minimum bandwidth of 128 kbps with the round-trip latency no greater than 100 ms and the maximum transmission unit no smaller than 576 bytes.

    4. Local authentication is useful where you cannot maintain a remote office setup of a minimum bandwidth of 128 kbps with the round-trip latency no greater than 150 ms and the maximum transmission unit no higher than 500 bytes.

    5. Local authentication in connected mode does not require any WLAN configuration.

    6. Local authentication can be enabled only on the WLAN of a FlexConnect AP that is in local switching mode.

    Answer: A,C,F Explanation:

    http://www.cisco.com/c/en/us/td/docs/wireless/controller/7- 2/configuration/guide/cg/cg_flexconnect.html

    100% Free Download!
    Download Free Demo:400-351 Demo PDF
    100% Pass Guaranteed!
    Download 2017 Dumps4Cert 400-351 Full Exam PDF and VCE

    Dumps4Cert ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

    2017 Dumps4Cert IT Certification PDF and VCE

    [Free] 2017(Oct) Dumps4cert Testinsides Cisco 400-351 Dumps with VCE and PDF Download 51-60

    Dumps4Cert 2017 Oct Cisco Official New Released 400-351
    100% Free Download! 100% Pass Guaranteed!
    http://www.Dumps4Cert.com/400-351.html

    CCIE Wireless (v3.1)

    Question No: 51 – (Topic 1)

    You are the wireless administrator for ACME corporation. You must configure a Cisco Catalyst 3850 Series Switch to work as mobility agent to allow access point association to this switch. Which statement about this scenario is true?

    1. Access points must be connected to an access port that has the access VLAN configured to be the same as the service port VLAN on the Catalyst 3850 switch.

      Access points must be connected to a trunk port with the native VLAN set to 1 in order to join the WLC on the Catalyst 3850 switch.

    2. Access points must be connected to an access port with the access VLAN configured to the same as the wireless management VLAN on the Catalyst 3850 switch.

    3. Access points must be connected to an access port that has the access VLAN configured to be the same as the management VLAN for the switch stack.

    4. Access points must be connected to an access port with the access VLAN configured to

    be any VLAN that has a Layer 3 interface (SVI) on the Catalyst 3850 switch.

    Answer: C Explanation:

    Getting Started with 3850

    Dumps4Cert 2017 PDF and VCE

    Dumps4Cert 2017 PDF and VCE

    Dumps4Cert 2017 PDF and VCE

    https://supportforums.cisco.com/document/146996/getting-started-wlc-5760-and-3850

    Question No: 52 – (Topic 1)

    Dumps4Cert 2017 PDF and VCE

    Refer to the exhibit.

    You are troubleshooting location accuracy problems on a customer deployment. You have done the wireless design and you are sure that the As are correctly placed on the Cisco Prime map. Everything is correctly synchronized between WLC, PI, and MSE but, you are sometimes getting elements tracked on the wrong floor. After you get this debug output from MSE, which step is next?

    1. Reduce the confidence level on MSE when the last heard value is higher than 150 seconds.

    2. Run a new calibration model and ensure that it is applied on the floor.

    3. Discard RSSI values lower than – 75 dbm.

    4. Check it the AP with MAC address 001c 0f 4c 45 60 is physically located on the floor where the element was wrongly located and if the inter-floor attenuation is weak.

    Answer: C Explanation:

    http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1- 3/configuration/guide/pi_13_cg/maps.pdf

    Dumps4Cert 2017 PDF and VCE

    Question No: 53 – (Topic 1)

    Which major block is not included in the ETSI Network Function Virtualization reference framework?

    1. Network Function Visualization Infrastructure.

    2. Network Function Virtualization Management and Orchestration.

    3. Network Function Virtualization Policy Manager.

    4. Virtualized Network Function/ Element Management Systems.

    Answer: C Explanation:

    https://en.wikipedia.org/wiki/Network_function_virtualization

    Question No: 54 – (Topic 1)

    You are the network administrator for ACME corporation. Your organization has deployed a single Cisco 5500 Series Wireless Controller with 100 Cisco Aironet 3500 Series Aps. A new IT member is worried that most of these Aps are working at a power Ievel3 on the 5GHz radio specially. As this power level setting is causing issues in your wireless network. Which option describes the likely cause of this behavior?

    1. The WLC has been recently rebooted, which causes the TPC algorithm to set power level 3 on all APs for 90 seconds.

    2. The controller TPC algorithm seems to have a problem. It might have been set to work in TPCv2 mode instead of TPCvl.

    3. The WLC is misconfigured because the static power of level 3 has been set for all the APs under TPC settings.

    4. Cisco 7925 wireless IP Phones are in use and the DTPC feature is enabled on the 5 GHz radio.

    Answer: D Explanation: Tx Power

    Num Of Supported Power Levels 5

    Tx Power Level 1 …………………….. 18 dBm

    Tx Power Level 2 …………………….. 15 dBm

    Tx Power Level 3……………………… 12 dBm

    Tx Power Level 4 …………………….. 9 dBm

    Tx Power Level 5 …………………….. 6 dBm

    https://supportforums.cisco.com/discussion/11635606/power-level-wlc

    Question No: 55 – (Topic 1)

    Which three conditions can trigger a client exclusion policy?(Choose three.)

    1. Excessive 802.11 probe request failures

    2. Excessive 802.lx authorization failures

    3. IP theft or IP reuse

    4. Excessive 802.lx authentication failures

    5. Excessive 802.11 association failures

    6. Excessive 802.11 packet retries

    Answer: C,D,E Explanation:

    http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/117714- technote-aireoswlc-00.html

    Question No: 56 – (Topic 1)

    Which action is needed to edit the settings of an RF profile?

    1. Disable both radio networks

    2. Disable custom power level settings for all APs within the group to which the profile is linked.

    3. Remove the desired RF profile from all AP groups

    4. RF profiles cannot be edited. They must be removed and recreated with the desired values.

    Answer: C Explanation:

    http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration- guide/b_cg80/b_cg80_chapter_01011101.html

    Question No: 57 – (Topic 1)

    When connecting an autonomous access point in workgroup bridge mode to a WLAN configured on a Cisco WLC. Which two options are true? (Choose two.)

    1. The WGB mode allows to connect only one wired client behind the WGB to the WLAN.

    2. The WGB cannot serve wireless clients.

    3. The traffic of the wired client behind the WGB can be tunneled only to the Cisco WLC on the VLAN configured for the dynamic interface of the WLAN.

    4. The traffic of the wired client tagged on a specific VLAN behind the WGB can be tunneled to the same VLAN behind the the Cisco WLC.

    5. The WGB creates a network extension for the wired clients.

    6. The WGB could serve wireless clients only on the other radio not connecting to the WLAN.

    Answer: B,C Explanation:

    http://www.cisco.com/c/en/us/td/docs/routers/access/wireless/software/guide/RolesWGB.ht ml

    Question No: 58 – (Topic 1)

    You have received a new Cisco 5760 Controller and have gone through the initial startup wizard. You are now trying to add APs to the controller, but these are not joining. Which three checks should you do next? (Choose three.)

    1. Check that the radios are not in a shutdown state.

    2. Check the country code of the controller. The APs do not join the controller if the country does not match.

    3. Check that the correct time is set on the controller.

    4. Check that option 53 has been set in the DHCP scope.

    5. Check that the controller has enough AP licenses.

    6. Check that the controller has been configured with the correct hostname. Otherwise, resolution fails.

    Answer: B,C,E Explanation: From:

    Dumps4Cert 2017 PDF and VCE

    http://www.cisco.com/c/en/us/td/docs/wireless/technology/5760_deploy/CT5760_Controller

    _Deployment_Guide/CT5760_Centralized_Configuration_eg.html#pgfId-1074746

    Dumps4Cert 2017 PDF and VCE

    Dumps4Cert 2017 PDF and VCE

    http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/lwap/co nfiguration_guide/b_ap_3se_5700_cg/b_ap-config_32se_5700_cg_chapter_010.html

    Question No: 59 – (Topic 1)

    Which enhancement was introduced in 802.11ac Wave 2 and was not present in 802.lln?

    1. 64 QAM

    2. 128 QAM

    3. MU-MIMO

    4. 40MHz channel width

    5. four spatial streams

    6. SU-MIMO

    Answer: C Explanation:

    Dumps4Cert 2017 PDF and VCE

    http://www.cisco.com/c/en/us/solutions/collateral/enterprise-networks/802-11ac-solution/q- and-a-c67-734152.html

    Question No: 60 – (Topic 1)

    Dumps4Cert 2017 PDF and VCE

    Refer to the exhibit.

    Dumps4Cert 2017 PDF and VCE

    Which feature (and associated show output) is seen here?

    1. Controllergt;show client tsm 802.11a 00:01:02:03:04:05 all

    2. Controllergt;show client wmm 802.11a 00:01:02:03:04:05 all

    3. Controllergt;show ap stats 802.11a00:01:02:03:04:05

    4. Controllergt;show client detail 00:01:02:03:04:05

    Dumps4Cert 2017 PDF and VCE

    Answer: A Explanation:

    http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-

    4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_ chapter_010000.html

    100% Free Download!
    Download Free Demo:400-351 Demo PDF
    100% Pass Guaranteed!
    Download 2017 Dumps4Cert 400-351 Full Exam PDF and VCE

    Dumps4Cert ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

    2017 Dumps4Cert IT Certification PDF and VCE