[Free] 2018(May) EnsurePass Braindumps Microsoft 70-743 Dumps with VCE and PDF 21-30

Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 21

You need to implement network virtualization.

On which object should you configure the virtual subnet ID?

  1. Virtual switch

  2. Hyper-V server

  3. VM

  4. Virtual network adapter

Answer: A

Question No: 22

You have a Hyper-V host named Server1 that runs Windows Server 2016.

Server1 has a virtual machine named VM1. VM1 is configured to run the Docker daemon. On VM1, you have a container network that uses transparent mode.

You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP. What should you do?

  1. On VM1, run docker network connect.

  2. On Server1, run docker network connect.

  3. On VM1, run Get-VMNetworkAdapter -VMName VM1 | Set-VMNetworkAdapter

    -MacAddressSpoofing On.

  4. On Server1, run Get-VMNetworkAdapter -VMName VM1 | Set-VMNetworkAdapter – MacAddressSpoofing On.

Answer: D Explanation:

If the container host is virtualized, and you wish to use DHCP for IP assignment, you must enable MACAddressSpoofing.

PS C:\gt; Get-VMNetworkAdapter -VMName ContainerHostVM | Set-VMNetworkAdapter – MacAddressSpoofing On

The command needs to be run on the Hyper-V host. References: https://msdn.microsoft.com/en-

us/virtualization/windowscontainers/management/container_networking

Question No: 23

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. Server1 is located in the perimeter network.

You install the Active Directory Federation Services server role on Server1. You create an Active Directory Federation Services (AD FS) farm by using a certificate that has a subject name of sts.contoso.com.

You need to enable certificate authentication from the Internet on Server1.

Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the solution.

A. 389

B. 443

C. 3389

D. 8531

E. 49443

Answer: B,E Explanation:

Configuring the following network services appropriately is critical for successful deployment of AD FS in your organization:

Configuring Corporate Firewall

References: https://technet.microsoft.com/en-us/library/dn554247(v=ws.11).aspx

Question No: 24

You have a server named Server1 that runs Windows Server 2016.

You need to install the DNS Server role on Server1. What should you run?

  1. the Install-Package cmdlet

  2. the setup.exe command

  3. the dnscmd.exe command

  4. the Enable-WindowsOptionalFeature cmdlet

Answer: D

Question No: 25 HOTSPOT

You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed.

You publish an application named App1 by using the Web Application Proxy.

You need to change the URL that users use to connect to App1 when they work remotely.

Which command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

The Set-WebApplicationProxyApplication cmdlet modifies settings of a web application published through Web Application Proxy. Specify the web application to modify by using its ID. Note that the method of preauthentication cannot be changed. The cmdlet ensures that no other applications are already configured to use any specified ExternalURL or BackendServerURL.

References: https://technet.microsoft.com/itpro/powershell/windows/wap/set- webapplicationproxyapplication

Question No: 26 HOTSPOT

You have a server named Server1 that runs Windows Server 2016 server.

Server1 has the Docker daemon configured and has a container named Container1.

You need to mount the folder C:\Folder1 on Server1 to C:\ContainerFolder in Container1.

Which command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 27

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

On Server1, you have the following zone configuration.

Ensurepass 2018 PDF and VCE

You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.

Solution: From Windows PowerShell on Server1, you run the Add-DnsServertrustAnchor cmdlet.

Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

The Add-DnsServerTrustAnchor command adds a trust anchor to a DNS server. A trust anchor (or trust “point”) is a public cryptographic key for a signed zone. Trust anchors must be configured on every non-authoritative DNS server that will attempt to validate DNS data. Trust Anchors have no direct relation to DSSEC validation.

References:

https://technet.microsoft.com/en-us/library/jj649932.aspx https://technet.microsoft.com/en-us/library/dn593672(v=ws.11).aspx

Question No: 28 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016.

Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. You have a highly available virtual machine named VM1. Server1 is the owner node of VM1. Server3 and Server4 are nodes of a scale-out file server named Cluster2.

The storage on Server1 is configured as shown in the following table.

Ensurepass 2018 PDF and VCE

VM1 is stored in C:\ClusterStorage\Volume1.

You need to move the virtual disk of VM1 to a different location.

What should you do? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Box 1: Failover Cluster Manager

You can use Failover Cluster Manager to do a Storage Migration to a shared folder.

Box 2: \\Cluster2\Share1

For a highly-available VM, the storage must be accessible by all nodes in the cluster. Therefore, in this scenario, we have to use the file share.

You c

References:

https://blogs.msdn.microsoft.com/clustering/2012/04/26/windows-server-2012-storage- migration-for-cluster-managed-virtual-machines/

Question No: 29

You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a multitenant RAS Gateway.

What should you install on Server1?

  1. the Network Controller server role

  2. the Remote Access server role

  3. the Data Center Bridging feature

  4. the Network Policy and Access Services server role

Answer: B Explanation:

RAS Gateway – Multitenant. You can deploy RAS Gateway as a multitenant, software- based edge gateway and router when you are using Hyper-V Network Virtualization or you have VM networks deployed with virtual Local Area Networks (VLANs). With the RAS Gateway, CloudService Providers (CSPs) and Enterprises can enable datacenter and cloud network traffic routing between virtual and physical networks, including the Internet. With the RAS Gateway, your tenants can use point-so-site VPN connections to access their VM network resources in the datacenter from anywhere. You can also provide tenants with site-to-site VPN connections between their remote sites and your CSP datacenter. In addition, you can configure the RAS Gateway with BGP for dynamic routing, and you can enable Network Address Translation (NAT) to provide Internet access for VMs on VM networks.

References:

https://technet.microsoft.com/en-us/windows-server-docs/networking/remote- access/remote-access

Question No: 30

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.

Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.

You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.

What should you do?

  1. From the properties of the NIC team on VM1, change the load balancing of the NIC team.

  2. From Hyper-V Manager on Server1, modify the settings of VM1.

  3. From Windows PowerShell on Server1, run the Set- VmNetworkAdapterFailoverConfigurationcmdlet.

  4. From Hyper-V Manager on Server1, modify the properties of vSwitch1.

Answer: B Explanation:

You can configure NIC teaming in the Guest OS; however, before NIC teaming will work in a virtual machine, you need to enable NIC teaming in the Advanced Features section of the VM settings.

100% Ensurepass Free Download!
Download Free Demo:70-743 Demo PDF
100% Ensurepass Free Guaranteed!
Download 2018 EnsurePass 70-743 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *