[Free] 2018(May) EnsurePass Braindumps Microsoft 70-741 Dumps with VCE and PDF 81-90

Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-741
100% Free Download! 100% Pass Guaranteed!

Networking with Windows Server 2016

Question No: 81

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.

Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.

You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that all of the Windows 10 computers can receive a DHCP lease.

Solution: You activate the scope. Does this meet the goal?

  1. Yes

  2. No

Answer: A Explanation:

https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx

Question No: 82 HOTSPOT

You have a DNS server named Server1.

The forwarders are configured as shown in the Forwarders exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

The Advanced Settings are configured as shown in the Advanced exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

The Root Hints are configured as shown in the Root Hints exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

Server1 does not contain any DNS zones.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Recursion is disabled so internet hosts cannot be resolved. The recursive test fails because recursion is disabled.

Server1 is not configured as a root server. The forwarders list would be greyed out if it was.

Question No: 83

You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1.

You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address.

You need to provide Internet connectivity for the client computers.

What should you do?

  1. On Server2, select the Internet and Internal network adapters and bridge the connections. From the DHCP console on Server1, authorize Server2.

  2. On Server1, stop the DHCP server. On the Internal network adapter on Server 2, enable Internet Connection Sharing (ICS).

  3. On Server2 run the New-NetNat -Name NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 131.107.0.10.

  4. Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.

Answer: B

Question No: 84 HOTSPOT

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server 1 has a virtual switch Switch1.

Server1 hosts the virtual machines configured as shown in the following table.

Ensurepass 2018 PDF and VCE

Windows firewall on VM1 and VM2 is configured to allow ICMP traffic. VM1 and VM2 connect to Switch1.

You fail to ping VM1 from VM2.

You need to view the VirtualSubnetid to which VM1 connects. Which cmdlet should you run on Server1.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Get-VMNetworkAdapter-VMName VM1 | forest-list

Question No: 85 HOTSPOT

You network contains an Active Directory named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.

The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.

Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

The DHCP scopes are configured as shown in the Scopes Exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx

Question No: 86

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.

Users report that their client computers fail to obtain an IP address.

You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.

You need to ensure that all of the client computers on the network can obtain an IP address from Server2.

Solution: You run the Set-DhcpServerv4Scope cmdlet.

Does this meet the goal?

  1. Yes

  2. No

Answer: A Explanation:

https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope

Question No: 87 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.

A domain user named User1 is a member of the groups shown in the following table.

Ensurepass 2018 PDF and VCE

On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the \Global access scope to the user.

Which actions can User1 perform? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx

Question No: 88

You have an Active Directory domain named contoso.com. The domain contains servers named

Server1 and Server2 that run Windows Server 2016. You install the Remote Access server role on

Server1. You install the Network Policy and Access Services server role on Server2. You need to

configure Server1 to use Server2 as a RADIUS server. What should you do?

  1. From Routing and Remote Access, configure the authentication provider.

  2. From the Connection Manager Administration Kit, create a Connection Manager profile.

  3. From Server Manager, create an Access Policy.

  4. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.

Answer: A

Question No: 89

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.

The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.

The domain contains three servers configured as shown in the following table.

Ensurepass 2018 PDF and VCE

Client computers obtain TCP/IP settings from Server3.

You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.

Server1 has four DNS zones configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You need to ensure that when a computer is removed from the network, the associated records are deleted automatically after 15 days.

Which two actions should you perform? Each correct answer presents part of the solution.

  1. Create a scheduled task that runs the Remove-Computer cmdlet.

  2. Modify the Zone Aging/Scavenging Properties of the zone.

  3. Modify the Time to live (TTL) value of the start of authority (SOA) record.

  4. Set the Scavenging period of Server1.

  5. Modify the Expires after value of the start of authority (SOA) record.

Answer: B,D Explanation:

https://technet.microsoft.com/en-us/library/cc771362(v=ws.10).aspx

Question No: 90

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.

All client computers dynamically register their names in the contoso.com DNS zone on Server1.

You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.

You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.

Solution: You set the Time to live (TTL) value of all of the records in the zone. Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

https://technet.microsoft.com/en-us/library/cc958972.aspx

100% Ensurepass Free Download!
Download Free Demo:70-741 Demo PDF
100% Ensurepass Free Guaranteed!
Download 2018 EnsurePass 70-741 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *