[Free] 2017(Oct) Dumps4cert Testinsides Cisco 500-170 Dumps with VCE and PDF Download 11-20

Dumps4Cert 2017 Oct Cisco Official New Released 500-170
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/500-170.html

FlexPod Design

Question No: 11 – (Topic 1)

Which is true about UCS High Availability?

  1. Support for 3 Fabric Interconnects

  2. Dual homing IOM to Fabric Interconnects

  3. Port Channeling within UCS system requires Fabric Interconnects and IOMs to be at least second generation.

  4. UCSM supports vPC configuration

Answer: C

Topic 2, Networking

Question No: 12 – (Topic 2)

Which item is an example of Role-Based Access Control and multi-tenancy support that can be applied to a UCS environment using the Cisco UCS Manager?

  1. Create roles for Data ONTAP Vserver administrators

  2. Create a storage administrator role with control over tasks related to the SAN

  3. Create interface groups on NetApp storage

  4. Apply NFS read/write access to a network share

Answer: B

Question No: 13 – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

What would be the correct configuration for the ports labeled?

  1. vlan 35fcoe vsan 35int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint portchannel15switchport mode trunkswitchport trunk allowed vlan 35spanning-tree port type edge trunkint vfc15bind interface po15switchport trunk allowed vsan 35vsan databasevsan 35 interface vfc15

  2. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport access vlan 35int vfc15bind interface po15switchport trunk allowed vsan 45vsan databasevsan 45 interface vfc15

  3. int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint

    po15switchport mode trunkswitchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15

  4. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vlan 35switchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15

  5. int eth1/31-32channel-group 15 mode activeint po15switchport mode access vsan 45vsan databasevsan 45 interface po15

Answer: A

Question No: 14 – (Topic 2)

Which hardware device should provide Fibre Channel services in a FlexPod design?

  1. Cisco UCS 6248 Fabric Interconnect

  2. NetApp FAS

  3. Cisco Nexus 3000

  4. Cisco Nexus 5500

Answer: D

Question No: 15 – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Following FlexPod recommended practices, which portchannel configuration is valid for the connectivity shown?

  1. A and B. portchannel 1C and E. po2 and vpc 2D and F. po3 and vpc 3G and H. portchannel 1I and K. po11 and vpc 11J and L. po12 and vpc 12

  2. A and B. vpc 1C and E. po2 and vpc 2D and F. po3 and vpc 3G and H. vpc 4I and K. po11 and vpc 11J and L. po12 and vpc 12

  3. A and B. portchannel 1C and D. po2 and vpc 2E and F. po3 and vpc 3G and H. portchannel 4I and J. po11 and vpc 11K and L. po12 and vpc 12

  4. A and B. portchannel 1C and D. vpc 2E and F. vpc 2G and H. portchannel 4I and J. vpc 11K and L. vpc 11

  5. A and B. po1 and vpc 1C and D. po2 and vpc 2E and F. po3 and vpc 3G and H. po4 and vpc 4I and J. po11 and vpc 11K and L. po12 and vpc 12

Answer: A

Question No: 16 – (Topic 2)

Cisco UCS Manager may be used to manage which four tasks within a Cisco UCS domain? (Choose four)

  1. Cisco UCS hardware including the chassis, servers, fabric interconnects, and i/o modules

  2. Cisco UCS resource management including WWN addresses, MAC addresses, UUIDs, and bandwidth

  3. Deployment of a Windows or Linux Operating system

  4. Management of non-Cisco x86 systems

  5. Network administration such as creating VLANs, uplink ports, port channels and LAN PIN groups

  6. SAN configuration tasks such as creating VSANs, QoS classes and definitions, and port channels.

  7. Deploy patches for software, such as an OS or an application

  8. Install software applications, such as databases, application server software, or web servers

Answer: A,B,E,F

Question No: 17 – (Topic 2)

Which Cisco Nexus switch is designed for low latency L2/L3 IP only networks?

  1. Nexus 5548

  2. Nexus 7000

  3. Nexus 3048

  4. Nexus 5596

Answer: C

Question No: 18 – (Topic 2)

In a FlexPod design, when can NetApp storage be directly connected to a Cisco UCS server?

  1. Never

  2. Always

  3. Only in a FlexPod Select design

  4. Only in a FlexPod Express design

  5. Only in a FlexPod DataCenter design

Answer: C

Question No: 19 – (Topic 2)

When using Virtual Port Channel (vPC) on a Nexus 5500 switch, what protocol is responsible for synchronization of configuration, spanning tree, MAC and VLAN information?

  1. Fibre Channel over Ethernet (FCoE)

  2. Spanning Tree Protocol (STP)

  3. LACP

  4. Cisco Fabric Services over Ethernet (CFSoE)

Answer: D

Question No: 20 – (Topic 2)

Under what circumstance can a Cisco Nexus 5548 perform an ISSU (nondisruptive)?

  1. When configured for VPCs

  2. When configured for L3

  3. When an STP-enabled switch is connected downstream

  4. When the STP Bridge Assurance feature is running on a link other than the VPC peer link.

Answer: A

Topic 3, Storage

100% Free Download!
Download Free Demo:500-170 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 500-170 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE

Leave a Reply

Your email address will not be published. Required fields are marked *