[Free] 2017(Oct) Dumps4cert Testinsides Cisco 400-051 Dumps with VCE and PDF Download 131-140

Dumps4Cert 2017 Oct Cisco Official New Released 400-051
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/400-051.html

CCIE Collaboration (v1.1)

Question No: 131 – (Topic 1)

An engineer wants to configure a Cisco IOS router to allow for up to four simultaneous conferences in CME mode. Which configuration meets the requirement?

  1. dspfram profile 1 conferenceCodec G711ulawMaximum sessions 4Maximum conferenceparticipants 8Telephony-serviceSdspfarm units 4Sdspfarm tag 4 hwcfbConference hardware

  2. dspfram profile 1 conferenceCodec G711ulawMaximum conference-participants 8TelephonyserviceSdspfarm units 4Sdspfarm tag 4 hwcfbConference hardwareMax- conference-participants 8

  3. dspfram profile 1 conferenceCodec G711ulawMaximum sessions 4Maximum conferenceparticipants 8Telephony-serviceSdspfarm units 1Sdspfarm tag 1 hwcfbConference hardwareMaxconferences 2

  4. dspfram profile 1 conferenceCodec G711ulawMaximum sessions 4Maximum conferenceparticipants 8Telephony-serviceSdspfarm units 1Sdspfarm tag 1 hwcfbConference hardwareMaxconferences 4

Answer: D

Question No: 132 – (Topic 1)

What is the maximum number of configurable speed dial entries for a Cisco Unified 9971 IP Phone?

A. 4

B. 199

  1. 50

  2. 3

  3. 2

Answer: B

Question No: 133 – (Topic 1)

Which three softkeys can be offered on a Cisco IP Phone 7965, running SCCP firmware, when it is in Remote In Use state? (Choose three.)

  1. Resume

  2. EndCall

  3. Select

  4. Barge

  5. NewCall

  6. cBarge

  7. Join

Answer: D,E,F

Question No: 134 – (Topic 1)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Which call status is this SIP message indicating?

  1. Caller is in conference using MUTE

  2. Caller is being call forwarded

  3. Caller is on hold

  4. Caller is transferred to voicemail

  5. Caller is hearing ring back

Answer: C

Question No: 135 – (Topic 1)

Which two SDP content headers can be found in a SIP INVITE message? (Choose two.)

  1. Expires

  2. Contact

  3. Connection Info

  4. Media Attributes

  5. Allow

  6. CSeq

Answer: C,D

Question No: 136 – (Topic 1)

A collaboration engineer is designing Cisco IMamp;P implementation to support instant

messaging logging for compliance. Which two external databases can be used to support that functionality? (Choose two.)

  1. Oracle database

  2. MySQL database

  3. Microsoft SQL database

  4. PostgreSQL database

  5. Informix SQL database

Answer: A,D Explanation:

The following IM and Presence Service features require an external database: Persistent Group Chat

Message Archiver (IM Compliance) External database:

PostgreSQL database, versions 8.3.x through 9.4.x are supported, and in IM and Presence Service Release, 11.0(1) versions: 9.1.9, 9.2.6, 9.3.6, 9.4.1 have been tested.

Note: You can also use Version 8.1.x of the PostgreSQL database, but the configuration of these versions may be different to the PostgreSQL database configuration described in this section. See the PostgreSQL documentation for details on how to configure these PostgreSQL database versions. If you use Version 8.1.x of the PostgreSQL database, the database configuration on IM and Presence Service is the same as described in this section.

Oracle database, versions 9g, 10g, 11g, and 12c are supported, and in IM and Presence Service Release, 11.0(1) versions: 11.2.0.1.0 and 12.1.0.1.0 have been tested.

You can install the database on either a Linux or a Windows operating system. See the relevant database documentation for details on the supported operating systems and platform requirements.

IPv4 and IPv6 are supported. http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/database_setup/ 10_0_1/CUP0_BK_D42EAF32_00_database-setup-guide-imp- 100/CUP0_BK_D42EAF32_00_database-setup-guide-imp-100_chapter_00.htm

Question No: 137 – (Topic 1)

An engineer is troubleshooting Cisco Jabber Federation where the server cannot discover the external Lync domains using SRV records. Which two steps resolve this problem? (Choose two)?

  1. Configure the port number as 5065.

  2. Configure the destination pattern as quot;lyncdomainname.comquot;.

  3. Set the Next Hop value as the IP address of the Microsoft Lync Server.

  4. Configure the destination pattern as quot;.com.lyncdomainname*quot;

  5. Configure the port number as 5060.

  6. Set the protocol to TLS.

  7. Set the Next Hop value as the IP address of the Lync Domain servers.

  8. Set the protocol to TCP.

Answer: F,G

Question No: 138 – (Topic 1)

N NO: 37

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

What caused this message on a Cisco 9971 IP phone, connected to a Cisco 3750X PoE switch, when a mobile phone is plugged into the IP Phone#39;s back USB port?

  1. The back USB port only supports Cisco USB devices such as a Cisco Unified Video camera

  2. USB classes for this USB port are not properly configured

  3. The USB port is not enabled by the administrator

  4. The mobile phone is requesting more power than the USB port could provide

  5. USB devices are not supported when the IP phone is powered by a Cisco PoE switch

Answer: D

Question No: 139 – (Topic 1)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Which two wireless security modes offer these configuration options on a Cisco 9971 IP Phone? (Choose two)

  1. Shared Key

  2. AKM

  3. EAP-FAST

  4. Open

  5. LEAP

  6. Open with WEP

Answer: A,F

Question No: 140 – (Topic 1)

A customer has a single Active Directory domain with users in various email domains. Each user is associated to only one email domain. The customer wants their users to federate to external organizations using their email addresses. What two methods are used to set up the integration between Active Directory, Cisco Unified CM, and IMamp;P? (Choose two.)

  1. CUCM LDAP Attribute for User ID set to sAMAccountName, CUCM LDAP Directory URI set to mail, IM Address Scheme set to Directory URI

  2. CUCM LDAP Attribute for User ID set to mail, IM Address Scheme set to User ID

  3. CUCM LDAP Attribute for User ID set to sAMAccountName, CUCM LDAP Directory URI set to msRTCSIP-primaryuseraddress, IM Address Scheme set to Directory URI

  4. CUCM LDAP Attribute for User ID set to mail, CUCM LDAP Directory URI set to mail, IM Address Scheme set to Directory URI

  5. CUCM LDAP Attribute for User ID set to mail, IM Address Scheme set to mail

Answer: A,D

100% Free Download!
Download Free Demo:400-051 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 400-051 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE

Leave a Reply

Your email address will not be published. Required fields are marked *