[Free] 2017(Oct) Dumps4cert Testinsides Cisco 352-001 Dumps with VCE and PDF Download 111-120

Dumps4Cert 2017 Oct Cisco Official New Released 352-001
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/352-001.html

CCDE鈩?Written Exam

Question No: 111 – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

A new IPv4 multicast-based video-streaming service is being provisioned. During the design-validation tests, you realize that the link between the two buildings is carrying multicast traffic even when there are no receivers connected to the switch in Building B and despite IGMP snooping being enabled on both Layer 2 switches and IGMPv2 runs on the hosts. Which design change will prevent the multicast traffic from being unnecessarily flooded throughout the campus network?

  1. Enable PIM snooping on both Layer 2 switches.

  2. Enable multicast storm control on the link between Switch 1 and Switch 2.

  3. Use static Layer 2 MAC forwarding entries on Switch 1.

  4. Change the IPv4 multicast group address such that it excludes the usage of link-local MAC addresses.

  5. Ensure that Switch 1 is an IGMP querier.

Answer: D

Question No: 112 – (Topic 2)

For a storage area network design, which technology allows a switch to support multiple Fibre Channel IDs per fabric port?

  1. N-Port Identifier Virtualization

  2. Inter-Virtual Storage Area Network Routing

  3. Zoning

  4. Fabric Port Trunking

  5. Node Port Virtualization

  6. Expansion Port Trunking

Answer: A

Question No: 113 – (Topic 2)

You work for a large company that has just acquired another smaller company. You have been asked to lead a group of SAN experts from both companies to design the integration plan that will be used to interconnect the SANs and migrate the data from the newly acquired company to the main storage arrays. The first thing that the team discovers is that the two SANs have the same domain IDs.

As the SAN team lead, what would you advise your team to do so that you can interconnect the two SANs while minimizing disruption?

  1. Use FCIP with Write Acceleration and IVR version 1 with a transit VSAN to expedite the data transfer between the two SANs.

  2. Change the domain IDs on both SANs so that they are both unique and then connect ISLs between the SANs.

  3. Use IVR NAT with a transit VSAN between the SANs.

  4. The two SANs cannot be merged without disruption.

Answer: C

Question No: 114 – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Which technology could be used in this design to provide link recovery and high traffic capacity?

  1. Rapid PVST

  2. MST

  3. PAgP

  4. Flex Links

Answer: C

Question No: 115 – (Topic 2)

In a redesign of a multiple-area network, it is recommended that summarization is to be implemented. For redundancy requirements, summarization is done at multiple locations for each summary. Some customers now complain of higher latency and performance issues for a server hosted in the summarized area. What design issues should be considered when creating the summarization?

  1. Summarization adds CPU overhead on the routers sourcing the summarized advertisement.

  2. Summarization prevents the visibility of the metric to the component subnets.

  3. Summarization creates routing loops.

  4. Summarization causes packet loss when RPF is enabled.

Answer: B

Question No: 116 – (Topic 2)

Which two features can be used to extend VRFs across a campus? (Choose two.)

  1. 802.1q trunks

  2. LDP

  3. MPLS TE

  4. GRE

  5. port channels

Answer: A,D

Question No: 117 – (Topic 2)

You have been asked to establish a design that will allow your company to migrate from a WAN service to a Layer 3 VPN service. In your design, you are keeping some WAN links between critical sites as a backup for this service. You plan to use OSPF as your IGP and BGP for the PE-CE protocol. When the Layer 3 VPN service is available, how will you prevent transit traffic over the backup links?

  1. Redistribute routes at the CE as external type 1.

  2. Redistribute routes at the CE as external type 2.

  3. Use conditional advertisement only when the Layer 3 service is down.

  4. Manually turn off the backdoor link when the Layer 3 service is up.

Answer: D

Question No: 118 – (Topic 2)

In a network design using carrier Ethernet, which three mechanisms can be used to improve Layer 2 down detection and thereby reduce routing convergence time? (Choose three.)

  1. BFD

  2. Ethernet port debounce timers

  3. link-state tracking

  4. object tracking

  5. fast IGP hello

Answer: A,D,E

Question No: 119 – (Topic 2)

A Service Provider is designing a solution for a managed CE service to a number of local customers using a single CE platform and wants to have logical separation on the CE platform using Virtual Routing and Forwarding (VRF) based on IP address ranges or packet length. Which is the most scalable solution to provide this type of VRF Selection process on the CE edge device?

  1. Static Routes for Route Leaking

  2. Policy Based Routing

  3. Multi-Protocol BGP

  4. OSPF per VRF Instance

Answer: B

Question No: 120 – (Topic 2)

Acme Corporation indicates that their network design must support the ability to scale to support a high number of remote sites. Which IGP is considered to scale better for a hub- and-spoke topology?

  1. BGP

  2. OSPF

  3. IS-IS

  4. EIGRP

Answer: D

100% Free Download!
Download Free Demo:352-001 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 352-001 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE

Leave a Reply

Your email address will not be published. Required fields are marked *