[Free] 2017(Oct) Dumps4cert Testinsides Cisco 352-001 Dumps with VCE and PDF Download 1-10

Dumps4Cert 2017 Oct Cisco Official New Released 352-001
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/352-001.html

CCDE鈩?Written Exam

Question No: 1 – (Topic 1)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Your company designed a network to allow server VLANs in a data center to span all access switches. In the design, Layer 3 VLAN interfaces and HSRP are configured on the aggregation switches. In which three ways should the design of the STP domain be optimized for server and application performance? (Choose three.)

  1. Use loop guard on access ports.

  2. Use PortFast on access ports.

  3. Use root guard on access ports.

  4. Align Layer 2 and Layer 3 forwarding paths.

  5. Use BPDU Skew Detection on access ports.

  6. Explicitly determine root and backup root bridges.

Answer: B,D,F

Question No: 2 – (Topic 1)

When developing an MVPN design, which performance and scalability consideration must be taken into account?

  1. CE end-to-end PIM adjacency establishment

  2. multicast data sent to all PE routers on the default MDT

  3. RP placement in the multicast VRF

  4. RP placement in the customer network

Answer: B

Question No: 3 – (Topic 1)

ACME Corporation is integrating IPv6 into their network, which relies heavily on multicast distribution of data. Which two IPv6 integration technologies support IPv6 multicast? (Choose two.)

  1. 6VPE

  2. 6PE

  3. dual stack

  4. ISATAP

  5. 6to4

  6. IPv6INIP

Answer: C,F

Question No: 4 – (Topic 1)

You are designing a Group Encrypted Transport Virtual Private Network solution consisting of 30 group members. Which measure helps protect encrypted user traffic from replay attacks?

  1. counter-based anti-replay

  2. time-based anti-replay

  3. nonce payload

  4. RSA-encrypted nonce

  5. digital certificates

Answer: B

Question No: 5 – (Topic 1)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

In this design, which technology would provide for the best use of resources to provide end-to-end Layer 2 connectivity?

  1. MSTP

  2. PAgP

  3. Multichassis EtherChannel

  4. LACP

Answer: C

Question No: 6 – (Topic 1)

A company has these requirements for access to their wireless and wired corporate LANs using 802.1x:

->Client devices that are corporate assets and have been joined to the Active Directory domain are allowed access.

->Personal devices must not be allowed access.

->Clients and access servers must be mutually authenticated.

Which solution meets these requirements?

  1. Protected Extensible Authentication Protocol/Microsoft Challenge Handshake Authentication Protocol Version 2 with user authentication

  2. Extensible Authentication Protocol-Transport Layer Security with machine authentication

  3. Extensible Authentication Protocol-Transport Layer Security with user authentication

  4. Protected Extensible Authentication Protocol/Microsoft Challenge Handshake Authentication Protocol Version 2 with machine authentication

Answer: B

Question No: 7 – (Topic 1)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

The design is being proposed for use within the network. The CE devices are OSPF graceful restart-capable, and the core devices are OSPF graceful restart-aware. The WAN advertisements received from BGP are redistributed into OSPF. A forwarding supervisor failure event takes place on CE A. During this event, how will the routes learned from the WAN be seen on the core devices?

  1. via CE A and CE B

  2. via CE A

  3. via CE B

  4. no WAN routes will be accessible

Answer: C

Question No: 8 – (Topic 1)

Your network operations team is deploying Access Control Lists (ACLs) across your Internet gateways. They wish to place an ACL inbound on the Internet gateway interface facing the core network (the quot;trustedquot; interface). Which one of these addresses would the ACL need for traffic sourced from the inside interface, to match the source address of the traffic?

  1. inside local

  2. outside local

  3. inside global

  4. outside global

Answer: A

Question No: 9 – (Topic 1)

You work as a network designer for a company that is replacing their Frame Relay WAN with an MPLS VPN service, where the PE-to-CE routing protocol is BGP. The company has 3000 routes in their distribution routers, and they would like to advertise their access routers through the MPLS network. Their service provider, however, only supports 1000 prefixes per VRF. Which two design solutions can be applied to ensure that your access routers will be able to reach all devices in your network? (Choose two.)

  1. Use prefix lists on your distribution routers to control which routes are sent to the MPLS network.

  2. On your distribution routers, configure null routes and aggregate routes for the prefixes in your network.

  3. Configure your distribution routers to send a default route to the MPLS network.

  4. Summarize the routes on the MPLS WAN interfaces of your distribution routers.

Answer: B,C

Question No: 10 – (Topic 1)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

If IEEE 802.1w is in use for this network design, what are two locations where spanning- tree root can be placed to ensure the least-disruptive Layer 2 failover for clients within VLANs 3 and 4? (Choose two.)

  1. Switch A

  2. Switch B

  3. Switch C

  4. Switch D

Answer: C,D

100% Free Download!
Download Free Demo:352-001 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 352-001 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE

Leave a Reply

Your email address will not be published. Required fields are marked *