[Free] 2017(Nov) Latesttests Testking Microsoft 70-385 Dumps with VCE and PDF Download 101-110

Latesttests 2017 Nov Microsoft Official New Released 70-385
100% Free Download! 100% Pass Guaranteed!
http://www.Latesttests.com/70-385.html

Recertification for MCSE: Messaging

Question No: 101 – (Topic 7)

You have an Exchange Server 2013 organization. The organization contains four servers in the same Active Directory site. The servers are configured as shown in the following table.

Latesttests 2017 PDF and VCE

EXB and EX4 are members of a database availability group (DAG) named DAG1. All users

use Microsoft Outlook 2013 to connect to their mailbox.

You need to recommend a client access solution to ensure that all of the users can connect to their mailbox if EX1 or EX2 fails.

What should you recommend?

  1. Add a layer 4 hardware load balancer that balances RPC traffic

  2. Add a layer 7 hardware load balancer that balances the traffic on port 443.

  3. Add a layer 7 hardware load balancer that balances RPC traffic.

  4. Replicate all of the databases in DAG1 to both DAG1 members.

Answer: B

Question No: 102 – (Topic 7)

Your company has offices in Miami, Singapore and Montreal. An Active Directory site exists for each office.

You have an Exchange Server 2013 organization that contains a server in each site. Each server has the Mailbox server role and the Client Access Server role installed.

All users connect to the Miami servers to retrieve the public folder hierarchy.

You need to create several public folders on the server in the Singapore office to meet the following requirements:

->Ensure that the public folders are available if a single Mailbox server fails.

->Ensure that the users in the Singapore office connect to their local server to retrieve the public folder hierarchy.

Which actions should you perform? (Each correct answer presents part of the solution. Choose all that apply.)

  1. Create a new public folder mailbox.

  2. Create a new public folder database.

  3. Run the Add-MailboxDatabaseCopy cmdlet.

  4. For each mailbox in the Singapore office, run the Set-Mailbox cmdlet and specify the

    -defaultpublicfoldermailbox parameter.

  5. Run the Set-PublicFolderDatabase cmdlet.

  6. For each public folder mailbox, run the Set-Mailbox cmdlet and specify the

-defaultpublicfoldermailbox parameter.

Answer: A,C,D

Question No: 103 – (Topic 7)

Your network contains an Active Directory forest. The forest contains two sites named Montreal and New York.

You have an Exchange Server 2013 organization that contains a Mailbox server and a Client Access server in each site.

The users in the New York site report that the offline address book (OAB) is not updated after an extended WAN outage between the sites.

The Montreal site contains the OAB generation server.

You need to ensure that the New York site users download the OAB from a server in the New York site.

Which two cmdlets should you run? (Each correct answer presents part of the solution. Choose two.)

  1. Set-Mailbox

  2. New-OfflineAddressBook

  3. New-Mailbox

  4. New-OabVirtualDirectory

  5. Set-OfflineAddressBook

Answer: A,C

Question No: 104 – (Topic 7)

You have an Exchange Server 2013 organization.

The help desk reports that users fail to access their mailbox by using the URL

http://mail.contoso.com. All of the users successfully connect to their mailbox by using Exchange ActiveSync.

You need to ensure that all of the users can access their mailbox by using the URL http://maif.contoso.com.

What should you configure on a Client Access server?

  1. From Internet Information Services (IIS) Manager, configure HTTP Response Headers on the OWA virtual directory.

  2. From Exchange Admin Center, create a new Outlook Web App mailbox policy.

  3. From File Explorer, modify the permissions of the Web.config file in the Default Web Site folder.

  4. From Internet Information Services (IIS) Manager, configure HTTP Redirect on the default web site.

Answer: D

Question No: 105 – (Topic 7)

You have an Exchange Server 2013 organization that contains four servers. All users access their email by using Microsoft Outlook 2010.

An administrator deploys a shared mailbox named Project.

You assign all of the users in the marketing department Full Access permissions to Project.

You discover that Project automatically appears in Outlook to all of the marketing department users.

You need to ensure that Project only appears in Outlook to the marketing department users who add the mailbox manually to their Outlook profile.

Which two cmdlets should you run? (Each correct answer presents part of the solution. Choose two.)

  1. Remove-MailboxPermission

  2. Set-Mailbox

  3. Remove-Mailbox

  4. Add-MailboxPermission

  5. New-Mailbox

Answer: A,B

Question No: 106 HOTSPOT – (Topic 7)

You have an Exchange Server 2013 organization that contains three servers. The servers are configured as shown in the following table.

Latesttests 2017 PDF and VCE

All of the servers are part of a database availability group (DAG) named DAG1. The databases are configured as shown in the following table.

Latesttests 2017 PDF and VCE

All of the databases replicate between all the members of DAG1. You plan to move all mailboxes from DB1 to DB2.

You need to ensure that the passive copies of DB1 are in a healthy state before you move the mailboxes.

Which command should you run? (To answer, select the appropriate options in the dialog box in the answer area.)

Latesttests 2017 PDF and VCE

Answer:

Latesttests 2017 PDF and VCE

Question No: 107 – (Topic 7)

You have an Exchange Server 2013 organization that contains one Client Access server. The Client Access server is accessible from the Internet by using a network address translation (NAT) device.

You deploy an additional Client Access server.

You also deploy an L4 hardware load balancer between the Client Access servers and the NAT device.

After deploying the hardware load balancer, you discover that all of the Exchange Server traffic is directed to a single Client Access server.

You need to ensure that the hardware load balancer distributes traffic evenly across both Client Access servers.

What should you do?

  1. Change the default route of the Client Access servers to point to the hardware load balancer.

  2. Configure the NAT device to pass the original source IP address of all connections from the Internet.

  3. Configure the Client Access servers to have a second IP address and web site. Create

    the Exchange virtual directories in the new sites.

  4. Configure SSL offloading on the hardware load balancer and the Client Access servers.

Answer: B

Question No: 108 HOTSPOT – (Topic 7)

You have an Exchange Server 2013 organization.

You have a user named User1 and a user named User2. Both users access their email by using Microsoft Outlook 2013.

You need to ensure that User2 can access all of the email messages in the mailbox of User1 the next time User2 opens Outlook.

What command should you run? (To answer, select the appropriate options in the answer area.)

Latesttests 2017 PDF and VCE

Latesttests 2017 PDF and VCE

Answer:

Latesttests 2017 PDF and VCE

Question No: 109 DRAG DROP – (Topic 7)

You have an Exchange Server 2013 organization that contains three servers named EX1,

EX2, and EX3. The servers are members of a database availability group (DAG) named DAG1. A mailbox database named DB1 is replicated to all the members of DAG1.

EX3 experiences a complete hardware failure. You need to restore EX3 on a new server.

You reset the computer account for EX3.

Which three actions should you perform next?

To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Latesttests 2017 PDF and VCE

Answer:

Latesttests 2017 PDF and VCE

Question No: 110 – (Topic 7)

You have an Exchange Server 2013 organization named adatum.com. The organization contains two servers named EX1 and EX2 that are configured as shown in the table.

Latesttests 2017 PDF and VCE

Both servers are members of a database availability group (DAG). EX1 has the active copy of a database named Database1.

Several users who have mailboxes in Database1 discover that all of their outbound email messages remain in their Drafts folder when they use Outlook Web App.

You need to ensure that the email messages are delivered. What should you do?

  1. On EX2, retry the message queues.

  2. On EX1, start the Microsoft Exchange Mailbox Transport Submission service.

  3. On EX2, start the Microsoft Exchange Mailbox Transport Submission service.

  4. On EX1, retry the message queues.

Answer: B

100% Free Download!
Download Free Demo:70-385 Demo PDF
100% Pass Guaranteed!
Download 2017 Latesttests 70-385 Full Exam PDF and VCE

Latesttests ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Latesttests IT Certification PDF and VCE

Leave a Reply

Your email address will not be published. Required fields are marked *