[Free] 2017(Nov) Latesttests Testinsides Microsoft 70-383 Dumps with VCE and PDF Download 121-130

Latesttests 2017 Nov Microsoft Official New Released 70-383
100% Free Download! 100% Pass Guaranteed!
http://www.Latesttests.com/70-383.html

Recertification for MCSE: SharePoint

Question No: 121 – (Topic 6)

A SharePoint farm includes two front-end web servers, one application server, and two clustered servers that run Microsoft SQL Server. The SharePoint Foundation Web Application service is not running on the application server.

You plan to configure the SharePoint farm to receive and store email messages and email message attachments in libraries.

You need to ensure that users can send email messages and attachments directly to libraries across the entire farm. You must accomplish this goal by using the least amount of effort.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  1. Install and configure the Simple Mail Transfer Protocol (SMTP) service on each application server.

  2. Install and configure the Simple Mail Transfer Protocol (SMTP) service on each front- end web server.

  3. Enable and start the SharePoint Foundation Web Application service on each application server.

  4. Enable incoming email by using the Automatic settings mode.

  5. Enable and start the SharePoint Foundation Web Application service on each front-end web server.

  6. Enable incoming email by using the Advanced settings mode.

Answer: B,F Explanation: B (not A):

  • Incoming email for SharePoint 2013 uses the SMTP service. You can use the SMTP service in one of two ways. You can install the SMTP service on one or more servers in the farm, or administrators can provide an email drop folder for email that is forwarded from the service on another server.

  • If you are not using a drop folder for email, the SMTP service must be installed on every front-end web server in the farm that you want to configure for incoming email.

    F (not D):

  • The basic scenario applies to a single-server farm environment and is recommended if you want to use default settings. The advanced scenario applies to a single-server farm or a multiple-server farm and contains several advanced options from which to choose

  • To configure incoming email in an advanced scenario

  • ->Verify that the user account that is performing this procedure is a member of the Administrators group on the server that is running the SharePoint Central Administration website.

    ->In Central Administration, clickSystem Settings.

    ->On the System Settings page, in theE-Mail and Text Messages (SMS)section, clickConfigure incoming e-mail settings.

    ->If you want to enable sites on this server to receive email, on the Configure Incoming E-mail Settings page, in theEnable Incoming E-Mailsection, clickYes.

    ->Select theAdvancedsettings mode.

    etc.

    Not C, not E: The SharePoint Foundation Web Application service is not running on the application server.

    Reference: Configure incoming email for a SharePoint 2013 farm

    Question No: 122 – (Topic 6)

    You are managing a site collection in a SharePoint farm.

    You need to configure the minimum level of permissions necessary for users to manage lists in the site collection.

    What permission level should you configure?

    1. Limited Access

    2. View Only

    3. Edit

    4. Create

    Answer: C

    Question No: 123 – (Topic 6)

    You administer a SharePoint Online tenant that has a site that contains a document library. Users from the Human Resource (HR) department have Contributor permissions to the site.

    You need to prevent users from the HR department from accessing documents in the library.

    Which permission option should you select?

    1. Stop Inheriting Permissions

    2. Grant Permissions

    3. Manage Parent

    4. Check Permissions

    5. Delete Unique Permissions

    Answer: A

    Explanation: Select Stop Inheriting Permissions on the document library for the HR department users. This will prevent them for accessing documents in this document library.

    Reference: Edit permissions for a list, library, or individual item

    https://support.office.com/en-us/article/Edit-permissions-for-a-list-library-or-individual-item- 02d770f3-59eb-4910-a608-5f84cc297782

    Question No: 124 – (Topic 6)

    A company uses SharePoint 2013 Server as its intranet portal. The Marketing department publishes many news articles, press releases, and corporate communications to the intranet home page.

    You need to ensure that the Marketing department pages do not impact intranet performance.

    Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

    1. In Central Administration, set up a User Policy for the Super User and Super Reader accounts.

    2. Configure IIS to use the Super User and Super Reader accounts for caching.

    3. Use the Farm Configuration Wizard to configure the Super User and Super Reader accounts.

    4. Use Windows PowerShell to add the Super User and Super Reader accounts.

    Answer: A,D

    Explanation: A: The way to correct this problem is to first create two normal user accounts in AD. These are not service accounts. You could call them domain\superuser and domain\superreader, but of course that’s up to you.The domain\superuser account needs to have a User Policy set for that gives it Full Control to the entire web application.

    D: If you are using any type of claims based authentication you will need to use Windows PowerShell. And Windows PowerShell is the hipper more modern and sustainable option anyway. If you are using classic mode authentication run the following cmdlets on one of your SharePoint servers:

    $w = Get-SPWebApplication quot;http://lt;servergt;/quot;

    $w.Properties[quot;portalsuperuseraccountquot;] = quot;domain\superuserquot;

    $w.Properties[quot;portalsuperreaderaccountquot;] = quot;domain\superreaderquot;

    $w.Update()

    If you are using claims based authentication run these cmdlets on one of your SharePoint servers:

    $w = Get-SPWebApplication quot;http://lt;servergt;/quot;

    $w.Properties[quot;portalsuperuseraccountquot;] = quot;i:0#.w|domain\superuserquot;

    $w.Properties[quot;portalsuperreaderaccountquot;] = quot;i:0#.w|domain\superreaderquot;

    $w.Update()

    Note:

    * If you have a SharePoint Publishing site and you check the event viewer every once in a while you might see the following warning in there:

    Object Cache: The super user account utilized by the cache is not configured. This can increase the number of cache misses, which causes the page requests to consume unneccesary system resources.To configure the account use the following command #39;stsadm -o setproperty -propertynameportalsuperuseraccount -propertyvalue account – urlwebappurl#39;. The account should be any account that has Full Control access to the SharePoint databases but is not an application pool account.Additional Data:Current

    default super user account: SHAREPOINT\system

    This means that the cache accounts for your web application aren’t properly set and that there will be a lot of cache misses. If a cache miss occurs the page the user requested will have to be build up from scratch again. Files and information will be retrieved from the database and the file system and the page will be rendered. This means an extra hit on your SharePoint and database servers and a slower page load for your end user.

    Reference: Resolving quot;The super user account utilized by the cache is not configured.quot;

    Question No: 125 HOTSPOT – (Topic 6)

    Northwind Traders plans to implement SharePoint Server 2013. You need to deploy SharePoint by using a streamlined topology.

    Where should you deploy each service? To answer, select the appropriate product from each list in the answer area.

    Latesttests 2017 PDF and VCE

    Answer:

    Latesttests 2017 PDF and VCE

    Explanation:

    App Management: Front-end server PerformancePoint: Batch-Processing Server User Profile: Front-end server

    User Profile Synchronization: Batch-Processing Server Secure Store: Front-end server

    In a streamline SharePoint 2013 topology put the low latency services, such as App Management, PerformancePoint, User Profile, and Secure Store, on the Front-end servers, while the more demanding processes with high latency, such as User Profile Synchronization, should be put on a Batch-Processing Server.

    For Performance Point Microsoft recommends to use a Batch-processing server or specialized server.

    Note:

    Front-end servers – optimize for low latency

    • Access Services

    • Business Data Connectivity

    • Managed Metadata

    • User Profile

    • Secure store

      Batch-processing servers

    • optimize for load

    • User Profile Synchronization

    • Workflow

    • Machine Translation

    • Work Management

      Specialized workloads (if needed)

      *optimize for medium throughput

    • Search

    • Excel Calculation

    • PerformancePoint

    • Project

    Question No: 126 HOTSPOT – (Topic 6)

    You are planning the capacity of a SharePoint Server 2013 server farm.

    In the table below, identify which requirements can be implemented in SharePoint Server 2013. Make only one selection in each row.

    Latesttests 2017 PDF and VCE

    Answer:

    Latesttests 2017 PDF and VCE

    Question No: 127 DRAG DROP – (Topic 6)

    A company has a multi-tenant SharePoint environment that includes a web application named WebApp1. WebApp1 is not secure.

    The company plans to install SharePoint apps that allow all tenants access to custom applications.

    You need to ensure that WebApp1 can host the SharePoint apps over a secure URL.

    Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

    Latesttests 2017 PDF and VCE

    Answer:

    Latesttests 2017 PDF and VCE

    Explanation:

    Box 1: Create an SSL certificate.

    Box 2: Install the SSL certificate on the SharePoint servers.

    Box 3: Configure IIS to bind the WebApp1 website to the SSL certificate.

    Note: Example:

    ->Create Self Signed Certificate on IIS 8

    ->Import Self Signed Certificate to SharePoint Certificate store

    ->Add Self Signed Certificate to trust management in Central Administration

    ->Configure IIS Binding

    Question No: 128 DRAG DROP – (Topic 6)

    You are the SharePoint administrator for a SharePoint 2013 deployment. You need to configure accounts.

    What should you do? To answer, drag the appropriate permission to the correct action. Each permission may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

    Latesttests 2017 PDF and VCE

    Answer:

    Latesttests 2017 PDF and VCE

    Explanation:

    Latesttests 2017 PDF and VCE

    • Manage Social Data – This level will give a user the ability to manage social tags and notes for all users.

    • Full Control – This level will give a user the ability to configure the Service Application and all the pieces of it.

    • Retrieve People Data for Search Crawlers – This level will give a user the ability to read profiles and there properties

    • Manage Profiles – This level will give a user account the ability to Add, Delete, or Edit permissions thru the User Profile Application.

    Question No: 129 – (Topic 6)

    You are managing a SharePoint environment. All SharePoint databases reside on servers that run Microsoft SQL Server 2012.

    You observe an increase in the consumption of disk space by the SharePoint configuration database.

    You need to minimize disk space usage.Which recovery model should you set?

    1. Transactional

    2. Full

    3. Bulk-logged

    4. Simple

    Answer: D

    Question No: 130 – (Topic 6)

    A company deploys Enterprise Search for SharePoint Server 2013. The company#39;s Marketing department site is hosted on a local SharePoint farm. The Marketing department launches an anniversary promotional campaign.

    After viewing search analytics reports for the campaign, you observe that search users are not being directed to the Marketing site.

    You need to direct users to the anniversary promotional campaign pages by moving the result to the top of the search results.

    What should you do?

    1. Configure properties of the Search Results Web Part NOT to search People, Conversations., or Video and default to Everything.

    2. Disable Query Rules that do not direct users to the site.

    3. Use a Query Rule to add a Promoted Result. Render the URL as a banner.

    4. Configure properties of the Search Result Web Part to use a Property filter to query content managed properties associated with Marketing.

    Answer: C

    Explanation: To promote individual results so that they appear towards the top of search results with a Query Rule, click Add Promoted Result . In the Add Promoted Result dialog box, in the Title field, type the name that you want to give this promoted result. In the URL field, type the URL of the result that should be promoted. Render the URL as a banner instead of as a hyperlink. Click Save.

    Reference: Manage query rules in SharePoint Server 2013 https://technet.microsoft.com/en-us/library/jj871676.aspx

    100% Free Download!
    Download Free Demo:70-383 Demo PDF
    100% Pass Guaranteed!
    Download 2017 Latesttests 70-383 Full Exam PDF and VCE

    Latesttests ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

    2017 Latesttests IT Certification PDF and VCE

    Leave a Reply

    Your email address will not be published. Required fields are marked *