[Free] 2017(Nov) Latesttests Dumpsleader Microsoft 70-384 Dumps with VCE and PDF Download 91-100

Latesttests 2017 Nov Microsoft Official New Released 70-384
100% Free Download! 100% Pass Guaranteed!
http://www.Latesttests.com/70-384.html

Recertification for MCSE: Communication

Question No: 91 HOTSPOT – (Topic 6)

You plan to deploy a Lync Server 2013 Edge Server infrastructure. The Edge Server deployment will be configured as shown in the following table.

Latesttests 2017 PDF and VCE

You need to configure the DNS records for Server1 to support the following features:

->Automatic client sign-in

->Discovery of federated partners

Which DNS records should you configure?

To answer, configure the correct service, protocol, and host for each SRV record in the answer area.

Latesttests 2017 PDF and VCE

Latesttests 2017 PDF and VCE

Answer:

Latesttests 2017 PDF and VCE

Explanation:

Latesttests 2017 PDF and VCE

Note:

  • the Edge generally only listens on port 5061 if you have Federation enabled

  • Port, protocol and firewall requirements for federation with Microsoft Lync Server 2013, Lync Server 2010 and Office Communications Server are similar to those for the deployed Edge Server. Clients initiate communication with the Access Edge service over TLS/SIP/TCP 443. Federated partners however, will initiate communications to the Access Edge service over MTLS/SIP/TCP 5061.

Question No: 92 DRAG DROP – (Topic 6)

You have a Lync Server 2013 infrastructure.

You plan to provide remote users with the ability to establish the following:

->Peer-to-peer calls between themselves and users on the internal network

->Chat sessions from mobile devices

You need to recommend which components must be configured to provide the required access to the remote users.

Which components should you recommend?

To answer, drag the appropriate component to the correct requirement in the answer area. Each component may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.

Latesttests 2017 PDF and VCE

Answer:

Latesttests 2017 PDF and VCE

Explanation:

Box 1: the Access Edge service Box 2: the A/V Edge Service Box 3: a reverse proxy

Note:

* The Edge Servers send and receive network traffic for the services offered by internal deployment by external users. The Edge Server runs the following services:

/Access Edge service The Access Edge service provides a single, trusted connection point for both outbound and inbound Session Initiation Protocol (SIP) traffic.

/Web Conferencing Edge service The Web Conferencing Edge service enables external users to join meetings that are hosted on your internal Lync Server 2013 deployment.

/A/V Edge service The A/V Edge service makes audio, video, application sharing, and file transfer available to external users. Your users can add audio and video to meetings that include external participants, and they can communicate using audio and/or video directly with an external user in point-to-point sessions. The A/V Edge service also provides support for desktop sharing and file transfer.

Authorized external users can access the Edge Servers in order to connect to your internal Lync Server 2013 deployment, but the Edge Servers do not provide a means for any other access to the internal network.

  • the A/V Edge servers are able to accept connections for peer-to-peer calls and conference calls.

  • The Reverse Proxy server is an optional, external component that is not a Lync Server role and is not defined in the Lync Topology. The reason this component is considered optional is because without it deployed an external Lync client can still connect to Lync and most features will function (IM, Presence, Calls, Desktop Sharing, etc) as will federated communications.

The reverse proxy is required for the following:

->To allow users to connect to meetings or dial-in conferences using simple URLs

->To enable external users to download meeting content

->To enable external users to expand distribution groups

->To allow the user to obtain a user-based certificate for client certificate based authentication

->To enable remote users to download files from the Address Book Server or to submit queries to the Address Book Web Query service

->To enable remote users to obtain updates to client and device software

->To enable mobile devices to automatically discover Front End Servers offering mobility services

->To enable push notifications to mobile devices from the Office 365 or Apple push notification services

Question No: 93 – (Topic 6)

You have a Lync Server 2013 infrastructure.

Your company has a sales department and a research department. You deploy persistent chat.

You need to configure persistent chat to meet the following requirements:

->Users in the sales department must be prevented from viewing the names of the rooms used by the research department.

->Users in the research department must be able to discover all of the rooms used

by their department.

What should you do?

A.

  • Create a user-level Persistent Chat Policy named Sales.

  • Apply the Sales policy to the sales and research users.

  • Create persistent chat rooms for each department and set the privacy to Secret.

    B.

  • Create a category named ResearchRooms.

  • Add the research users as Allowed members to the ResearchRooms category.

  • Add the sales users as Denied members to the ResearchRooms category.

  • Create persistent chat rooms for each department and set the privacy to Closed.

    C.

  • Create a category named ResearchRooms.

  • Add the research users as Allowed members to the ResearchRooms category.

  • Add the sales users as Denied members to the ResearchRooms category.

  • Create persistent chat rooms for each department and set the privacy to Secret.

    D.

  • Create a user-level Persistent Chat Policy named Sales.

  • Apply the Sales policy to the sales and research users.

  • Create persistent chat rooms for each department and set the privacy to Open.

  • Answer: C

    Explanation: http://technet.microsoft.com/en-us/library/jj204859.aspx http://technet.microsoft.com/en-us/library/jj205166.aspx

    Question No: 94 DRAG DROP – (Topic 6)

    You have a Microsoft Office Communications Server 2007 R2 infrastructure that contains two servers. The servers are configured as shown in the following table.

    Latesttests 2017 PDF and VCE

    You plan to deploy Lync Server 2013.

    You need to implement a pilot deployment of Lync Server 2013 for internal users. You install a new server named Server3.

    Which four actions should you perform next?

    To answer, move the four appropriate actions from the list of actions to the answer area and arrange them in the correct order.

    Latesttests 2017 PDF and VCE

    Answer:

    Latesttests 2017 PDF and VCE

    Explanation:

    Box 1:

    Latesttests 2017 PDF and VCE

    Box 2:

    Latesttests 2017 PDF and VCE

    Box 3:

    Latesttests 2017 PDF and VCE

    Box 4:

    Latesttests 2017 PDF and VCE

    Note:

    * You use the Topology Builder Merge wizard to merge topology information. This tool collects information about your Office Communications Server 2007 R2 environment, including Edge Server information, and publishes that information to a database shared with Lync Server 2013. After you publish the merged topology, Topology Builder is used to view the Office Communications Server 2007 R2 topology information and information about the newly deployed Lync Server 2013 topology.

    Question No: 95 – (Topic 6)

    Your network contains the servers shown in the following table.

    Latesttests 2017 PDF and VCE

    You move all users to Lync1 and remove OCS1 from the network.

    A user named User1 reports that he cannot sign in to the Lync 2013 client. Before the migration, User1 signed in successfully. Other users can sign in to the Lync 2013 client.

    You run nslookup.exe from the client computer of User1 and obtain the result shown in the following window.

    Latesttests 2017 PDF and VCE

    You verify that the client computer of User1 trusts the certificate on lync1.contoso.com. You need to ensure that User1 can sign in to Lync 2013.

    What should you do?

    1. Configure the Lync 2013 client to use automatic configuration.

    2. Modify the client policy for User1.

    3. Modify the hosts file on the client computer of User1.

    4. Modify the service location (SRV) record.

    Answer: A

    Question No: 96 HOTSPOT – (Topic 6)

    You have a Lync Server 2013 infrastructure. The infrastructure has monitoring reports and Call Admission Control (CAC) deployed.

    A user named User1 reports poor audio quality during web conferences. You need to identify whether User1 uses the Siren codec for audio conferences.

    Which monitoring report should you use from the Microsoft Lync Server 2013 Control Panel?

    To answer, select the appropriate report in the answer area.

    Latesttests 2017 PDF and VCE

    Answer:

    Latesttests 2017 PDF and VCE

    Explanation:

    Latesttests 2017 PDF and VCE

    The User Activity Report provides a detailed list of the peer-to-peer and conferencing sessions carried out by your users in a given time period. Unlike many of the Monitoring

    Reports, the User Activity Report ties each call to individual users. For example, peer-to- peer sessions specify the SIP URIs of the person who initiated the call (the From user) and the person who was being called (the To user). If you expand the information for a conference, you#39;ll see a list of all the conference participants and the role they held for that conference.

    The User Activity Report is sometimes referred to as the quot;help deskquot; report. That#39;s because the report is often used by help desk personnel to retrieve session information for a specific user. You can filter for calls made to or made by an individual user simply by typing the user#39;s SIP URI in the User URI prefix box.

    Question No: 97 DRAG DROP – (Topic 6)

    Your network contains a Lync Server 2013 infrastructure and a Microsoft Exchange Server 2013 organization. You have three distribution groups. The groups are configured as shown in the following table.

    Latesttests 2017 PDF and VCE

    You need to ensure that all of the users on Team1 and Team2 can answer calls that are in the same queue. The users must be able to choose when they want to participate in the queue.

    Which three actions should you perform?

    To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

    Latesttests 2017 PDF and VCE

    Answer:

    Latesttests 2017 PDF and VCE

    Explanation:

    Box 1: Create a new formal response group. Box 2: Create a new response group queue Box 3: Create a new workflow

    Note:

    • The Response Group application in Lync Server 2010 provides for treatment, queuing, and routing of inbound calls.

    • Formal agents are considered active when they manually sign in to the Response Group application web sign in page. Informal agents are considered active when they login to the Lync client, because they are automatically signed in to their Response Groups when they login.

    • A workflow defines the behavior of a call from the time that the phone rings to the time that someone answers the call. The workflow specifies the queue to use for holding the

    call, and specifies the routing method to use for hunt groups or the questions and answers to use for interactive response groups. A workflow also defines settings such as a welcome message, music on hold, business hours, and holidays.

    You use the Response Group Configuration Tool to create workflows. You can access the Response Group Configuration Tool from the Response Group page of Lync Server Control Panel.

    Question No: 98 – (Topic 6)

    You have a Lync Server 2013 infrastructure. You plan to deploy an archiving solution.

    Your company has a compliance policy that has the following requirements:

    ->Instant messaging (IM) conversations between external users and the members of a group named Traders must be archived.

    ->IM conversations between external users and the members of a group named HR

    must be archived.

    ->The internal IM conversations of all other users must be archived.

    You need to configure archiving policies to meet the compliance policy requirements.

    Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)

    1. Configure the global archiving policy to archive internal and external IM conversations.

    2. Create a site-level archiving policy that is configured to archive internal and external IM conversations.

    3. Create a user-level archiving policy that is configured to archive external IM traffic. Assign the policy to the Traders group.

    4. Create a user-level archiving policy that is configured to archive internal and external IM traffic. Assign the policy to the HR group.

    5. Configure the global archiving policy to archive internal IM conversations.

    Answer: C,D,E

    Question No: 99 DRAG DROP – (Topic 6)

    You have a Lync Server 2013 infrastructure that contains two servers. The servers are configured as shown in the following table.

    Latesttests 2017 PDF and VCE

    You deploy two new servers. The servers are configured as shown in the following table.

    Latesttests 2017 PDF and VCE

    You need to recommend changes to the infrastructure to meet the following requirements:

    ->Ensure that remote users can connect to the network by using Microsoft Lync 2013.

    ->Ensure that Server3 authenticates the remote users before the users connect to a

    Front End Server.

    Which Lync Server 2013 server role should you recommend deploying to each server?

    To answer, drag the appropriate server role to the correct server in the answer area. Each server role may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.

    Latesttests 2017 PDF and VCE

    Answer:

    Latesttests 2017 PDF and VCE

    Explanation:

    Box 1: Director

    Box 2: Edge Server

    Note:

    • Edge Server enables your users to communicate and collaborate with users outside the organization’s firewalls. These external users can include the organization’s own users who are currently working offsite, users from federated partner organizations, and outside users who have been invited to join conferences hosted on your Lync Server deployment.

    • A Director is a server running Lync Server 2013 that authenticates user requests, but does not home any user accounts. You optionally can deploy a Director in the following two scenarios:

    / If you enable access by external users by deploying Edge Servers, you should also deploy a Director. In this scenario, the Director authenticates the external users, and then passes their traffic on to internal servers. When a Director is used to authenticate external users, it relieves Front End pool servers from the overhead of performing authentication of these users. It also helps insulate internal Front End pools from malicious traffic such as denial-of-service attacks. If the network is flooded with invalid external traffic in such an attack, this traffic ends at the Director.

    / If you deploy multiple Front End pools at a central site, by adding a Director to that site you can streamline authentication requests and improve performance. In this scenario, all requests go first to the Director, which then routes them to the correct Front End pool.

    Question No: 100 – (Topic 6)

    You have a Lync Server 2013 infrastructure that contains four servers. The servers are configured as shown in the following table.

    Latesttests 2017 PDF and VCE

    You run the Get-CsManagementStoreReplicationStatus cmdlet and discover the following replication issue:

    Latesttests 2017 PDF and VCE

    From Telnet, you verify that you can connect to Lync3 over TCP ports 443, 4443, 5061, and 5062. You republish the topology successfully and you restart Lync3.

    You need to identify what is causing the replication issue. What should you identify?

    1. A firewall issue

    2. A failed service

    3. A share permission issue

    4. A certificate issue

    5. A routing issue

    Answer: D

    Explanation: Not Firewall issue as you can telnet to the ports

    Not a Failed Service as you can telnet to the ports

    Not a Share Permissions issue as replication is working with the other 2 servers.

    Not Routing Issue, routing is working as telnet is functional.

    100% Free Download!
    Download Free Demo:70-384 Demo PDF
    100% Pass Guaranteed!
    Download 2017 Latesttests 70-384 Full Exam PDF and VCE

    Latesttests ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

    2017 Latesttests IT Certification PDF and VCE

    Leave a Reply

    Your email address will not be published. Required fields are marked *