[Free] 2017(Nov) Latesttests Braindumps Microsoft 70-410 Dumps with VCE and PDF Download 91-100

Latesttests 2017 Nov Microsoft Official New Released 70-410
100% Free Download! 100% Pass Guaranteed!
http://www.Latesttests.com/70-410.html

Installing and Configuring Windows Server 2012

Question No: 91 – (Topic 1)

You have a server named Server1 that runs Windows Server 2012 R2. You need to create a script that will create and mount a virtual hard disk. Which tool should you use?

  1. diskpart.exe

  2. vdsldr.exe

  3. fsutil.exe

  4. vds.exe

Answer: A

Question No: 92 – (Topic 1)

Your network contains an Active Directory forest named contoso.com. All domain controllers currently run Windows Server 2008 R2.

You plan to install a new domain controller named DC4 that runs Windows Server 2012 R2.

The new domain controller will have the following configurations:

->Schema master

->Global catalog server

->Active Directory Federation Services server role

->Active Directory Certificate Services server role

You need to identify which configuration can be fulfilled by using the Active Directory Domain Services Configuration Wizard.

Which configuration should you identify?

  1. Enable the global catalog server.

  2. Install the DNS Server role.

  3. Install the Active Directory Certificate Services role.

  4. Transfer the schema master.

Answer: A

Question No: 93 – (Topic 1)

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.

You create a group Managed Service Account named gservice1.

You need to configure a service named Service1 to run as the gservice1 account. How should you configure Service1?

  1. From the Services Console, configure the recovery settings

  2. From a command prompt, run sc.exe and specify the config parameter

  3. From Windows PowerShell, run Set-Service and specify the -PassThrough parameter

  4. From a command prompt, run sc.exe and specify the sdset parameter

Answer: B Explanation:

Sc config, Modifies the value of a service’s entries in the registry and in the Service Control Manager database.

obj= {lt;AccountNamegt; | lt;ObjectNamegt;}

Specifies a name of an account in which a service will run, or specifies a name of the Windows driver object in which the driver will run. The default setting is LocalSystem. password= lt;Passwordgt;

Specifies a password. This is required if an account other than the LocalSystem account is used.

Question No: 94 HOTSPOT – (Topic 1)

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.

You need to add a user named User1 to a group named ServerAdmins.

What command should you run? To answer, select the appropriate options in the answer area.

Latesttests 2017 PDF and VCE

Latesttests 2017 PDF and VCE

Answer:

Latesttests 2017 PDF and VCE

Question No: 95 – (Topic 1)

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.

Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. VM1 has several snapshots.

You need to modify the snapshot file location of VM1. What should you do?

  1. Right-click VM1, and then click Export.

  2. Shut down VM1, and then modify the settings of VM1.

  3. Delete the existing snapshots, and then modify the settings of VM1.

  4. Pause VM1, and then modify the settings of VM1.

Answer: C

Question No: 96 – (Topic 1)

Your network contains an Active Directory domain named contoso.com. You have a Group Policy object (GPO) named GP1 that is linked to the domain. GP1 contains a software restriction policy that blocks an application named App1.

You have a workgroup computer named Computer1 that runs Windows 8. A local Group Policy on Computer1 contains an application control policy that allows App1.

You join Computer1 to the domain.

You need to prevent App1 from running on Computer1. What should you do?

  1. From Computer1, run gpupdate/force.

  2. From Group Policy Management, add an application control policy to GP1.

  3. From Group Policy Management, enable the Enforced option on GP1.

  4. In the local Group Policy of Computer1, configure a software restriction policy.

Answer: B Explanation:

AppLocker policies take precedence over policies generated by SRP on computers that are running an operating system that supports AppLocker.

AppLocker policies in the GPO are applied, and they supersede the policies generated by SRP in the GPO and local AppLocker policies or policies generated by SRP.

Question No: 97 – (Topic 1)

You have a server named Server1 that runs Windows Server 2012 R2. You plan to create a storage pool that will contain a new volume.

You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout.

What is the minimum number of 256-GB disks required for the storage pool?

  1. 2

  2. 3

  3. 4

  4. 5

Answer: C Explanation:

It takes 3 discs (minimum) in order to create a storage pool array with parity. If this array were using fixed provisioning, this would not be enough given the 256MB capacity (since only 2/3rds of 256 X 3 – less than 600 – could be used as actual data with the rest being parity bits), but since this array uses thin provisioning, a 600GB volume could technically be set up on a 20GB disc and it would still show as 600GB. (So, essentially, the question really becomes how many drives it takes in a storage pool to create a parity array.)

References:

http://technet.microsoft.com/en-us/library/hh831391.aspx http://www.ibeast.com/content/tools/RaidCalc/RaidCalc.asp http://www.raid-calculator.com/default.aspx

https://www.icc-usa.com/raid-calculator

Question No: 98 DRAG DROP – (Topic 1)

Your network contains three servers. The servers are configured as shown in the following tablE.

Latesttests 2017 PDF and VCE

Your company plans to standardize all of the servers on Windows Server 2012 R2. You need to recommend an upgrade path for each server.

The solution must meet the following requirements:

->Upgrade the existing operating system whenever possible.

->Minimize hardware purchases.

Which upgrade path should you recommend for each server?

To answer, drag the appropriate upgrade path to each server in the answer area. Each upgrade path may be used once, more than once, or not at all.

Latesttests 2017 PDF and VCE

Answer:

Latesttests 2017 PDF and VCE

Explanation:

Latesttests 2017 PDF and VCE

Upgrade paths for Windows Server 2012 R2 are limited. In fact, it’s easier to specify when you can perform an upgrade than when you can’t. If you have a 64-bit computer running Windows Server 2008 or Windows Server 2008 R2, then you can upgrade it to Windows Server 2012 R2 as long as you use the same operating system edition.

Windows Server 2012 R2 does not support the following:

Upgrades from Windows Server versions prior to Windows Server 2008 Upgrades from pre-RTM editions of Windows Server 2012 R2 Upgrades from Windows workstation operating systems

Cross-platform upgrades, such as 32-bit Windows Server 2008 to 64-bit Windows Server 2012

Upgrades from any Itanium edition

Cross-language upgrades, such as from Windows Server 2008, U.S.English to Windows Server 2012, French

In any of these cases, the Windows Setup program will not permit the upgrade to proceed.

References:

http://technet.microsoft.com/en-us/library/jj134246.aspx

Question No: 99 – (Topic 1)

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs windows 8.

DC1 is configured as a DHCP server as shown in the exhibit. (Click the Exhibit button.)

Latesttests 2017 PDF and VCE

Computer1 is configured to obtain an IP address automatically.

You notice that Computer1 is unable to obtain an IP address from DC1. You need to ensure that Computer1 can receive an IP address from DC1. What should you do?

  1. Disable the Allow filters.

  2. Disable the Deny filters.

  3. Authorize DC1.contoso.com.

  4. Activate Scope [10.1.1.0] Contoso.com.

Answer: A Explanation:

A red down arrow indicates an unauthorized DHCP server. A DHCP server that is a domain controller or a member of an Active Directory domain queries Active Directory for the list of authorized servers (identified by IP address). If its own IP address is not in the list of authorized DHCP servers, the DHCP Server service does not complete its startup sequence and automatically shuts down.

Question No: 100 – (Topic 1)

Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.

Latesttests 2017 PDF and VCE

VM2 sends and receives large amounts of data over the network.

You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.

What should you configure?

  1. NUMA topology

  2. Resource control

  3. resource metering

  4. virtual Machine Chimney

  5. The VLAN ID

  6. Processor Compatibility

  7. The startup order

  8. Automatic Start Action

  9. Integration Services

  10. Port mirroring

  11. Single-root I/O virtualization

Answer: K Explanation:

Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.

References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831410.aspx

Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335

Topic 2, Volume B

100% Free Download!
Download Free Demo:70-410 Demo PDF
100% Pass Guaranteed!
Download 2017 Latesttests 70-410 Full Exam PDF and VCE

Latesttests ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Latesttests IT Certification PDF and VCE

Leave a Reply

Your email address will not be published. Required fields are marked *