[Free] 2017(Nov) Latesttests Braindumps Microsoft 70-410 Dumps with VCE and PDF Download 41-50

Latesttests 2017 Nov Microsoft Official New Released 70-410
100% Free Download! 100% Pass Guaranteed!
http://www.Latesttests.com/70-410.html

Installing and Configuring Windows Server 2012

Question No: 41 – (Topic 1)

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.

The domain contains a user named User1 and a global security group named Group1. You need to add a new domain controller to the domain.

You install Windows Server 2012 R2 on a new server named DC3. Which cmdlet should you run next?

  1. Add-AdPrincipalGroupMembership

  2. Install-AddsDomainController

  3. Install WindowsFeature

  4. Install AddsDomain

  5. Rename-AdObject

  6. Set-AdAccountControl

  7. Set-AdGroup

  8. Set-User

Answer: C Explanation:

It is the 2nd step when installing a DC by powershell on a fresh server.

Question No: 42 DRAG DROP – (Topic 1)

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 and Server2 run a Server with a GUI installation of Windows Server 2012 R2.

You remove the Graphical Management Tools and Infrastructure feature on Server2. You need to restart Server2.

What should you do? (To answer, drag the appropriate tools to the correct statements. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)

Latesttests 2017 PDF and VCE

Answer:

Latesttests 2017 PDF and VCE

Explanation:

Latesttests 2017 PDF and VCE

When you uninstall quot;Server-GUI-Shellquot; you are left with a quot;Minimal Server Interfacequot; server. So, File Explorer and IE10 are unavailable, but MMC and Server Manager work and MMC and Server Manager will allow you to restart server2 either locally or remotely from Server1.

References:

Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p.44

Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p.19-22

Question No: 43 – (Topic 1)

Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8.

You deploy a server named Server1 that runs Windows Server 2012 R2.

You install a new client-server application named App1 on Server1 and on the client computers. The client computers must use TCP port 6444 to connect to App1 on Server1.Server1 publishes the information of App1 to an intranet server named Server2 by using TCP port 3080.

You need to ensure that all of the client computers can connect to App1. The solution must ensure that the application can connect to Server2.

Which Windows Firewall rule should you create on Server1?

  1. an inbound rule to allow a connection to TCP port 3080

  2. an outbound rule to allow a connection to TCP port 3080

  3. an outbound rule to allow a connection to TCP port 6444

  4. an inbound rule to allow a connection to TCP port 6444

Answer: D Explanation:

  1. Server2 needs inbound on 3080.

  2. All ports outbound allowed by default.

D. Server1 gets request from Client PC’s it needs an inbound rule for 6444.

By default, Windows Firewall with Advanced Security blocks all unsolicited inbound network traffic, and allows all outbound network traffic. For unsolicited inbound network traffic to reach your computer, you must create an allow rule to permit that type of network traffic. If a network program cannot get access, verify that in the Windows Firewall with Advanced Security snap-in there is an active allow rule for the current profile. To verify that there is an active allow rule, double-click Monitoring and then click Firewall.

If there is no active allow rule for the program, go to the Inbound Rules node and create a new rule for that program. Create either a program rule, or a service rule, or search for a group that applies to the feature and make sure all the rules in the group are enabled. To permit the traffic, you must create a rule for the program that needs to listen for that traffic. If you know the TCP or UDP port numbers required by the program, you can additionally restrict the rule to only those ports, reducing the vulnerability of opening up all ports for the program.

Question No: 44 – (Topic 1)

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that has the DNS Server server role installed. Server1 hosts a primary zone for contoso.com.

The domain contains a member server named Server2 that is configured to use Server1 as its primary DNS server.

From Server2, you run nslookup.exe as shown in the exhibit. (Click the Exhibit button.)

Latesttests 2017 PDF and VCE

You need to ensure that when you run Nslookup, the correct name of the default server is displayed.

What should you do?

  1. On Server1, create a reverse lookup zone.

  2. On Server1, modify the Security settings of the contoso.com zone.

  3. From Advanced TCP/IP Settings on Server1, add contoso.com to the DNS suffix list.

  4. From Advanced TCP/IP Settings on Server2, add contoso.com to the DNS suffix list.

Answer: A Explanation:

Make sure that a reverse lookup zone that is authoritative for the PTR resource record exists.

PTR records contain the information that is required for the server to perform reverse name lookups.

References:

http://technet.microsoft.com/en-us/library/cc961417.aspx

Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4: Deploying and configuring core network services, Objective 4.1: Configure IPv4 and IPv6 addressing, p.246

Question No: 45 – (Topic 1)

You have a server named Server1. Server1 runs Windows Server 2012 R2. Server1 has a thin provisioned disk named Disk1.

You need to expand Disk1.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  1. From File and Storage Services, extend Disk1.

  2. From File and Storage Services, add a physical disk to the storage pool.

  3. From Disk Management, extend the volume.

  4. From Disk Management, delete the volume, create a new volume, and then format the volume.

  5. From File and Storage Services, detach Disk1.

Answer: A,B Explanation:

Step 1 (B): if required add physical disk capacity.

Step 2 (A): Dynamically extend the virtual disk (not volume).

The File and Storage Services role and the Storage Services role service are installed by default, but without any additional role services. This basic functionality enables you to use Server Manager or Windows PowerShell to manage the storage functionality of your servers.

Windows Server 2012 Storage Space subsystem now virtualizes storage by abstracting multiple physical disks into a logical construct with specified capacity.

The process is to group selected physical disks into a container, the so-called storage pool, such that the total capacity collectively presented by those associated physical disks can appear and become manageable as a single and seemingly continuous space.

Subsequently storage administrator creates a virtual disk based on a storage pool, configure a storage layout which is essentially a RAID level, and expose the storage of the virtual disk as a drive letter or a mapped folder in Windows Explorer.

The system administrator uses File and Storage Services in Server Manager or the Disk Management tool tore scan the disk, bring the disk online, and extend the disk size.

Question No: 46 – (Topic 1)

Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Print and Document Services server role installed.

You connect a new print device to the network. The marketing department and the sales department will use the print device.

You need to provide users from both departments with the ability to print to the network print device. The solution must ensure that if there are multiple documents queued to print, the documents from the sales users print before the documents from the marketing users.

What should you do on Server1?

  1. Add two printers. Modify the priorities of each printer and the security settings of each printer

  2. Add two printers and configure printer pooling

  3. Add one printer and configure printer pooling.

  4. Add one printer. Modify the printer priority and the security settings

Answer: A Explanation: Explanation

To set different print priority to different groups Open Printers and Faxes.

Right-click the printer you want to set, click Properties, and then click the Advanced tab. In Priority, click the up or down arrows, and then click OK. Or, type a priority level, where 1 is the lowest level and 99 is the highest, and then click OK. Click Add Printer to add a second logical printer for the same physical printer. For instructions, see Related Topics.

Click the Advanced tab.

In Priority, set a priority higher than that of the first logical printer. Instruct the regular group of users to use the first logical printer name and the group with higher priority to use the second logical printer name. Set the appropriate permissions for the different groups.

Question No: 47 – (Topic 1)

Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.

Latesttests 2017 PDF and VCE

You need to ensure that VM1 can use more CPU time than the other virtual machines when the CPUs on Server1 are under a heavy load.

What should you configure?

  1. NUMA topology

  2. Resource control

  3. resource metering

  4. virtual Machine Chimney

  5. The VLAN ID

  6. Processor Compatibility

  7. The startup order

  8. Automatic Start Action

  9. Integration Services

  10. Port mirroring

  11. Single-root I/O virtualization

Answer: B Explanation:

B. Resource controls provide you with several ways to control the way that Hyper-V allocates resources to virtual machine. Resource control in used in the event where you need to adjust the computing resources of a virtual machine, you can reconfigure the resources to meet the changing needs. You can also specify resource controls to automate how resources are allocated to virtual machines.

References:

http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831410.aspx http://technet.microsoft.com/en-us/library/cc742470.aspx

Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335

Question No: 48 – (Topic 1)

Your network contains an Active Directory forest named contoso.com. All domain

controllers currently run Windows Server 2008 R2.

You plan to install a new domain controller named DC4 that runs Windows Server 2012 R2.

The new domain controller will have the following configurations:

->Schema master

->Global catalog server

->DNS Server server role

->Active Directory Certificate Services server role

You need to identify which configurations cannot be fulfilled by using the Active Directory Domain Services Configuration Wizard.

Which two configurations should you identify? (Each correct answer presents part of the solution. Choose two.)

  1. Install the DNS Server role.

  2. Enable the global catalog server.

  3. Install the Active Directory Certificate Services role.

  4. Transfer the schema master.

Answer: C,D Explanation:

Installation Wizard will automatically install DNS and allows for the option to set it as a global catalog server. ADCS and schema must be done separately.

Question No: 49 – (Topic 1)

You have a server named Server1 that runs Windows Server 2012 R2. You promote Server1 to a domain controller.

You need to view the service location (SRV) records that Server1 registers in DNS. What should you do on Server1?

  1. Open the Srv.sys file.

  2. Open the Netlogon.dns file.

  3. Run ipconfig /displaydns.

  4. Run Get-DnsServerDiagnostics.

Answer: B Explanation:

  1. Timestamp server driver

  2. Netlogon service creates a log file that contains all the locator resource records stored in netlogon.

  3. used to display current resolver cache content

  4. Gets DNS event logging details

Latesttests 2017 PDF and VCE

C:\Users\Chaudhry\Desktop\1.jpg

Question No: 50 – (Topic 1)

You have a server named Server1 that runs Windows Server 2012 R2.

On Server1, you open Computer Management as shown in the exhibit. (Click the Exhibit button.)

Latesttests 2017 PDF and VCE

You need to ensure that you can create a 3-TB volume on Disk 1. What should you do first?

  1. Create a storage pool.

  2. Convert the disk to a GPT disk.

  3. Create a VHD, and then attach the VHD.

  4. Convert the disk to a dynamic disk.

Answer: B

100% Free Download!
Download Free Demo:70-410 Demo PDF
100% Pass Guaranteed!
Download 2017 Latesttests 70-410 Full Exam PDF and VCE

Latesttests ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Latesttests IT Certification PDF and VCE

Leave a Reply

Your email address will not be published. Required fields are marked *